kelvin12382003
Member Since: 02 Sep 2011
Location: Hong Kong
Posts: 19
|
Hi all
I have a 2012 D4 but i dont have the 3rd row seat at the back. I was wondering how much in total to install everything.
is it a easy job to do?
does anyone on here could tell me the list of part numbers that I will need?
thanks
kelvin
|
19th Oct 2012 4:57 pm |
|
|
sarumlight
Member Since: 07 Nov 2008
Location: Off the Plain
Posts: 1590
|
Can't comment on the parts and prices but it is an easy job to do - everything is just bolted in with big bolts the same as the ones that hold the rear seatbelts in place. Ideally you should use new bolts as they have a thread locking compound on them, and they should be tightened to 40NM with a torque wrench.
The seats themselves are VERY heavy and tricky to get into the car without scratching the boot trim - get some help lifting them and take care.
|
19th Oct 2012 5:22 pm |
|
|
kelvin12382003
Member Since: 02 Sep 2011
Location: Hong Kong
Posts: 19
|
sarumlight wrote:Can't comment on the parts and prices but it is an easy job to do - everything is just bolted in with big bolts the same as the ones that hold the rear seatbelts in place. Ideally you should use new bolts as they have a thread locking compound on them, and they should be tightened to 40NM with a torque wrench.
The seats themselves are VERY heavy and tricky to get into the car without scratching the boot trim - get some help lifting them and take care.
Hi
thanks for the reply. I guess it will take me quite sometime to get all the part number.
hopefully I will get back here when i have done so!!1
thanks anyway
|
20th Oct 2012 3:06 pm |
|
|