PAIO
Member Since: 12 Apr 2016
Location: BELLUNO
Posts: 107
|
How to adjust the EPB of Disco 4 |
|
Hi i have disco 4 2012 HSE 188 Kw i will some information about the EBP . I try mani time to reach the ‘Park Brake Bedding for adjusted the EPB; follow the LR The Bedding in procedure without success. Please could help me ? I should changed the Rear disc and before making the change i want to understand the correct procedure
Thanks Peter
|
17th Apr 2016 8:22 pm |
|
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26716
|
It works, but you need to take your time with the procedure. When Bodsy says do it all within 10 seconds, he's right but use 9.5 of them! Don't rush it.
|
17th Apr 2016 11:47 pm |
|
|
PAIO
Member Since: 12 Apr 2016
Location: BELLUNO
Posts: 107
|
Ok Thanks but this does not match ? or i wrong me some step !
a) With the Engine running, press the brake pedal fully on and off x 3 times.
b) On the third press, hold the brake pedal down.
c) With the brake pedal still in the down position, pull the EPB switch upwards x 4 times and then
downwards 3 times. This must be completed within 10 seconds.
>>>NOTE
pull the EPB ? Pull and release the EPB x 4 Time or pull 1 Time for acetivate the EPB and then continue pull for other 3 Time ?
d) Your dash display will then show ‘Park Brake Bedding Cycle Active’ or something similar. If it
hasn’t, then release the brake pedal and try again.
>> NOTE On my disply nothing appears !
e) You need to ensure that you are on a clear piece of road or land as this procedure needs to be completed 10 times. etcc
|
18th Apr 2016 7:04 am |
|
|