Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Maintenance & Mods (D4)

Aftermarket rearview camera
Post Reply  Down to end
Page 1 of 1
MrNicotra
 


Member Since: 21 Jul 2023
Location: Central Belt, Scotland
Posts: 37

United Kingdom 2006 Discovery 3 TDV6 S Auto Buckingham BlueDiscovery 3
Aftermarket rearview camera

Hi all.

I have an aftermarket touchscreen headunit and would like to fit a reversing camera. I've done it before in other vehicles and completely understand the process.

My question on the D3 is where to get the reverse signal from. Normally I'd use the reversing lights, but the camera goes in the tailgate handle and was hoping to avoid wiring all the way around it and into the lights for reverse signal. Is there a harness or cable in there that gives me rev signal for D3 S trim?

I've looked for this in the forum prior to posting but I believe people typically go for the 'proper' solution with the stock headunit, etc, and can't find info on the wiring itself.

Thank you
  
Post #235146526th Oct 2023 8:30 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10368

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

The passenger side rear cubby box, maybe slightly easier.
Towbar connector point
Green/brown wire maybe
  
Post #235146826th Oct 2023 8:54 pm
View user's profile Send private message View poster's gallery Reply with quote
MrNicotra
 


Member Since: 21 Jul 2023
Location: Central Belt, Scotland
Posts: 37

United Kingdom 2006 Discovery 3 TDV6 S Auto Buckingham BlueDiscovery 3

Dark green in the LH quarter panel, I think I found it. Thank you. Will have a go this weekend.
  
Post #235147026th Oct 2023 9:34 pm
View user's profile Send private message View poster's gallery Reply with quote
MrNicotra
 


Member Since: 21 Jul 2023
Location: Central Belt, Scotland
Posts: 37

United Kingdom 2006 Discovery 3 TDV6 S Auto Buckingham BlueDiscovery 3

Hello again. After a few weeks of prioritising other stuff in the Disco, I got to work on the camera. Wiring was easy enough and tested that it works.

The problem now is how to pass the cables through the rubber conduits behind the upper tailgate (liftgate). It seems the existing cables have used up all the available space. In addition to them being curved which in itself can make things difficult.

Any tips on how to accomplish this?

Click image to enlarge
  
Post #23553258th Dec 2023 4:36 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10368

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

I can't help sorry. I fitted it on a range rover, so only had the choice of 1 that led to the glass.

I had to cut off the yellow plug and solder it back up again.
  
Post #23553278th Dec 2023 4:59 pm
View user's profile Send private message View poster's gallery Reply with quote
JordsDisco
 


Member Since: 22 May 2020
Location: Newcastle
Posts: 1489

United Kingdom 2008 Discovery 3 3.0 SDV6 GS Manual Santorini BlackDiscovery 3

I’ve fed wire that way.

Basically carefully remove both ends of the rubber tube from the body work and feed the wire through. You need to be a bit brutal.

I may have used a crochet hook or similar to do this, simply attaching the wire end to the top of it. Worked for me is all I can say.

Thereafter I worked the wire down the side and into the area you want.
  
Post #23553348th Dec 2023 6:44 pm
View user's profile Send private message View poster's gallery Reply with quote
MrNicotra
 


Member Since: 21 Jul 2023
Location: Central Belt, Scotland
Posts: 37

United Kingdom 2006 Discovery 3 TDV6 S Auto Buckingham BlueDiscovery 3

Thanks - I'll have a go this weekend and report back.
  
Post #23553358th Dec 2023 7:05 pm
View user's profile Send private message View poster's gallery Reply with quote
Sylvester19
 


Member Since: 18 Jul 2020
Location: Central Scotland
Posts: 113

Ukraine 2016 Discovery 4 3.0 TDV6 Landmark LE Auto Indus SilverDiscovery 4

A length of nylon strimmer line, tape the wire to it and pull it through
  
Post #235545210th Dec 2023 12:04 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site