JL
Member Since: 02 Jun 2015
Location: West coast
Posts: 50
|
Air suspension trouble c1A13 |
|
Replaced the Hitachi unit with a amk about one month ago, and now suddenly I would get the fault ; C1A13 Pressure does not decreases when venting gallery.
I Took apart and cleaned the rear and middle valve Block and I replaced the front one (due to the White powder issue) at the same time I replaced the compressor.
Could it be the pressure switch in the middle valve Block?
Sometimes it worsk fine, other times I would get this fault, so it is not constant.
There is also a leak at the back of the air supply exhaust silencer (!!?) making the car fart a bit louder when parking.
When searcing for a replacement part I can see that they are stated "only for Hitachi compressors" making me think the routing May be a bit differnet with the amk unit.
|
18th Jun 2018 12:24 am |
|
|
JL
Member Since: 02 Jun 2015
Location: West coast
Posts: 50
|
So the car has been fine for a period now, until today when the suspension fault message came up again. seems like a mot of People get this fault, and they end up Just replacing everything to solve it.
|
1st Jul 2018 10:52 pm |
|
|