Member Since: 05 Nov 2019
Location: Yorkshire
Posts: 3
Britpart front brake caliper
Any one using or used britpart brake calipers
5th Nov 2019 8:22 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4628
I have fitted them on a couple of D3's and they seem fine! I had to grind them slightly though to make them fit yµ (idµ - eAµ) ψ=mψ
5th Nov 2019 8:35 pm
George1993
Member Since: 05 Nov 2019
Location: Yorkshire
Posts: 3
Ok cheers did you have to take much off them?
My front caliper is sticking had it off and cleaned it up but no joy
5th Nov 2019 8:40 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4628
Its a long time since I last used them but if I recall correctly I had to do a very slight grind near the seat face with the carrier. You can get kits to rebuild the original calipers including the sliders, pistons, etc if your old ones are serviceable!
Be careful the heat doesn't distort your disc!!yµ (idµ - eAµ) ψ=mψ
5th Nov 2019 9:22 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
My D3 fronts have been on for over 4 years now.
90 has had britpart ones for much onger than that as has the S2.
I dont normally like britpart anything as some of their stuff is just shocking, but these have been just fine.
Member Since: 05 Nov 2019
Location: Yorkshire
Posts: 3
Cheers lads
The sliders and pads are free
Took the caliper off and cleaned it up the pistons took some pushing back was fine for a day now the wheel is hot again after a few miles
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum