| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
markyzs180
Member Since: 21 Sep 2017
Location: West Midlandshire
Posts: 63
  
|
Hi there... I've searched through most of the threads in this section but can't find the answer so...
I've got an early FBH that already has the pin 2 Wbus wire so would I be right in thinking I can just plug my cable directly into the OBD port?
Cheers 
|
 27th Nov 2017 11:56 pm |
|
|
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
|
What cable are you intending to plug into the OBD port? Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
|
| 28th Nov 2017 12:15 am |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18445
|
No, you can wire the WBUS line to the OBD port so you can use a KKL adapter directly, but that wiring is not there from the factory.
www.disco3.co.uk/fbh 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 28th Nov 2017 12:46 am |
|
|
markyzs180
Member Since: 21 Sep 2017
Location: West Midlandshire
Posts: 63
|
Thanks for the replies gents
I'll be using a blue 409.1 vagcom cable (if I can remember where it is!)
Just thought that as mine was an early one it may already be wired to the OBD but not a problem I'll just snip the red pin 2 wire and go in that way - fingers crossed!
Ordered the pin 2 wire from the shop for a mates RRS as well
|
| 28th Nov 2017 7:54 pm |
|
|
markyzs180
Member Since: 21 Sep 2017
Location: West Midlandshire
Posts: 63
|
Ok guru's quick (and maybe dumbass) question...
I've already got the pin 2 Wbus in the 8 pin connector so I have snipped this and connected to pin 7 on the OBD lead, connected to 12v and neg, fired up the WTT software, changed the com port, hit the diagnose button and.... nothing! Software sits there saying 'initialising' so, dumb question time...
do i need the iginition on? 
I know that the CAN may affect the webasto software but I was hoping to quickly clear the lockout faults then disconnect it all and then just let the car fire it up as its well below 5 degree's...
|
| 14th Dec 2017 10:21 pm |
|
|
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
|
When I connect my laptop up, using the cable I got from Martin, I have to connect it all up and then pull the fuse for the heater and count to 10 before putting in back, it then connects straight away. If I just plug it in without pulling the fuse I get the same problem your having.
Pete. IID, webasto software and workshop facility's available.
|
| 17th Dec 2017 12:11 am |
|
|
markyzs180
Member Since: 21 Sep 2017
Location: West Midlandshire
Posts: 63
|
Thanks Pete... I'll give that a try
|
| 17th Dec 2017 12:20 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
