Cheers Robbie, will be seeking out to enlist a local IID owner, because mine is driving me nuts.
I presume this will also help correct the "distance to Empty" forecast, because its that that is really driving me nuts. Reads empty when there's at least 10 litres left in the tank
1st Feb 2015 5:39 pm
nicksalgado
Member Since: 24 Jun 2014
Location: Rio de Janeiro
Posts: 6
Many thanks for the answers and the welcome.
Only the IITool is capable of doing this correction ? What about the others (like nanocom) ?
Speaking about scanners, what is the best tool for personal use ?
1st Feb 2015 7:15 pm
stevetonks
Member Since: 27 Jan 2015
Location: Worcestershire
Posts: 14
Not sure about the others but the IIDTool is by far the best package that I found when looking to buy. It's a neat little package that, if you purchase the BT version, talks to you iPad/iPhone via Bluetooth.
You can do pretty much anything you would need to do and more. Customer support is first class. To give you an example:
Today I contacted the team to ask if the surround camera calibration test routine was in the device firmware. It's not but they will send me a new build later this week with it in and I can then replace my broken camera...
4th Feb 2015 9:35 pm
nicksalgado
Member Since: 24 Jun 2014
Location: Rio de Janeiro
Posts: 6
nicksalgado wrote:
Many thanks for the answers and the welcome.
Only the IITool is capable of doing this correction ? What about the others (like nanocom) ?
Speaking about scanners, what is the best tool for personal use ?
I already ordered a IIDTool BT .......
Thanks to all helped me.
can this be done on a D3 with the IID tool as well?
5th Feb 2015 8:17 am
nicksalgado
Member Since: 24 Jun 2014
Location: Rio de Janeiro
Posts: 6
How to correct ?
Dear Friends,
New questions about this subject.
I received my IIDToll. For the correction of fuel consumption, not sure what to do.
The computer indicates a 9.5 l/100Km when in fact is 10.9 l/100Km (about 15% more than the indicated value)
The IIDTool indicates that the setting is +3.5% ....
What I have to do ??? Increase the +3.5% to get a more correct number ? Decrease ?
The numbers vary from -8.0% to +8.0% ......
Sorry for this question, but I didnt find any comments about this at the documentation (or the internet)
Regards,
11th Mar 2015 1:10 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Reduce it to -5% and monitor for a while before refining it.
shanegtr wrote:
can this be done on a D3 with the IID tool as well?
Sorry but no.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 24 Jun 2014
Location: Rio de Janeiro
Posts: 6
Roobie,
Thanks !!!!!!
Another question, if possible.
One of the possibilities at Read/Clear Fault is the ADVANCED fault reading.
What are the standard settings for this option ?
Is there anything to be changed there for the common people (or is just for the advanced users) ?
11th Mar 2015 1:23 pm
nicksalgado
Member Since: 24 Jun 2014
Location: Rio de Janeiro
Posts: 6
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
