Member Since: 22 Sep 2010
Location: Notts.
Posts: 8093
D4 hitch assist short cut tip.
This is to change the two bendy guide lines on the reversing camera to one bendy to assist in lining the tow bar and hook up, it can be a pain going through the menu to change these either way, the tip is to simply tap once on the screen while in reverse, this brings the three options up instantly (two lines, one line and sensors ) and once de-selected and re-selected change immediately.
This may be in the manual but I can’t find it.It can when others can't,
It will when others won't,
It goes where others don't.
7th Nov 2018 8:08 pm
wireworld
Member Since: 19 Oct 2013
Location: Shropshire
Posts: 145
I think you press the screen when the reversing camera shows. Then choose an option
7th Nov 2018 10:00 pm
Bardley
Member Since: 02 May 2018
Location: Hertfordshire
Posts: 440
Can I ask what needs enabling in the CCF to gain hitch assist?2011 MY D4 HSE
Previously 2001 D2 TD5, 1996 D1 300Tdi, 1985 90 2.2 petrol.
Bikes! KTM, BMW, British, Classics and others.
7th Nov 2018 11:52 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8093
Don’t think it is available on your MY, may be wrong.It can when others can't,
It will when others won't,
It goes where others don't.
8th Nov 2018 8:34 am
DrewLR4
Member Since: 17 Jan 2018
Location: South Devon
Posts: 173
I have it on my 10 plateIID Tool
Disco 1 tdi traded up
Disco 1 V8 LPG traded up
RR P38 V8 LPG Melted
Disco 2 tdi - Divorce settlement
Shocking amount of mid life crisis sports cars.
X5 - Bad decision
Jeep Liberty - Now in Cyprus
Crisis over and back in a Disco
Think it can only be done on MY14 or later where you can select the rear camera on the move, etc, but stand to be corrected, with the IID Tool go into the towing settings and select tow hitch or something similar, you can get the single line, disable the sensors for towing and get the camera to zoom in when you get around a metre from the to hitch.
Member Since: 17 Jan 2018
Location: South Devon
Posts: 173
My 2010 does all the above and only an XSIID Tool
Disco 1 tdi traded up
Disco 1 V8 LPG traded up
RR P38 V8 LPG Melted
Disco 2 tdi - Divorce settlement
Shocking amount of mid life crisis sports cars.
X5 - Bad decision
Jeep Liberty - Now in Cyprus
Crisis over and back in a Disco
Member Since: 14 Oct 2008
Location: Devon
Posts: 936
Think you need surround cameras to get some of the tow assist stuff to workMY18 RRS Autobiography Fuji White
MY15 D4 silver Commercial
MY11 D4 Fuji White Landmark (Gone)
MY11 D4 Silver Commercial(Gone)
Isuzu Utah D Max(Gone)
John Deere Gator HPX
Nifty Lift HR12
Kubota KX41-2
8th Nov 2018 10:48 pm
Steve RR
Member Since: 16 Jul 2010
Location: Ayrshire
Posts: 60
Yes you do need the surround cameras to have this, it’s been on my 2010 and 2011 both with full surround cameras.2010 XS with lots of upgrades
2011 Commercial with every option possible!Fuji white(gone and missed 😥)
2007 TDV8 FFRR
4.6 P38 Autobiography
300Tdi county 110
Too many late Classic RR to count
Bowler Tomcat
4th Aug 2021 7:14 pm
notyalc
Member Since: 07 Mar 2020
Location: Northumberland
Posts: 75
My 2016 has it, but no surround cameras.
Option only appeared after Ccf changes with the iid tool though.
4th Aug 2021 8:04 pm
Steve RR
Member Since: 16 Jul 2010
Location: Ayrshire
Posts: 60
Humm, I wonder if I can do that on our 2011 FFRR then 🤔2010 XS with lots of upgrades
2011 Commercial with every option possible!Fuji white(gone and missed 😥)
2007 TDV8 FFRR
4.6 P38 Autobiography
300Tdi county 110
Too many late Classic RR to count
Bowler Tomcat
4th Aug 2021 8:07 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8093
notyalc wrote:
My 2016 has it, but no surround cameras.
Option only appeared after Ccf changes with the iid tool though.
My MY2014 has it without surround cameras and no change to the CCF.It can when others can't,
It will when others won't,
It goes where others don't.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
