DiscoDad
Member Since: 06 Nov 2006
Location: Beautiful Teesdale
Posts: 3003
  
|
Hi Chaps,
I know this topic has been discussed a few times but I couldn't get a definitive answer to these questions by doing a search on here.
I want to update my normal filament trailer lights with some LED units like these...
http://www.towingandtrailers.co.uk/shop/14/31/60/694/index.htm
Questions:
1. Will they work straight away?
2. Will the indicators flash?
3. Will the car detect that the trailer is plugged in?
If not, what do I need to do/buy to get the whole lot to work correctly?
Thanks in advance. 
|
 31st Oct 2010 8:15 pm |
|
|
DiscoDad
Member Since: 06 Nov 2006
Location: Beautiful Teesdale
Posts: 3003
|
Anyone?
|
| 1st Nov 2010 11:46 pm |
|
|
|
|
disco4x4au
Member Since: 19 Jan 2006
Location: Perth
Posts: 409
|
| Re: D4 & LED Trailer Lights. |
|
DiscoDad wrote:
Questions:
1. Will they work straight away?
2. Will the indicators flash?
3. Will the car detect that the trailer is plugged in?
If not, what do I need to do/buy to get the whole lot to work correctly?
Thanks in advance.
1. If you wire them right, they should!
2. No, the D4 won't flash the leds 
3. But no, it won't detect the trailer either 
You'll need a shunt box, or a power resistor or similar. I used a 22W globe wired across the indicator circuit and earth. Have a search on LED shunt box?
Cheers,
Gordon ex - 2006 D3 TDV6 SE, silver, with lots of stuff - R.I.P.
ex - 2009 D3 TDV6 SE, silver, had lots of stuff too!
Now - 2010 RRS 3.0 TDV6, rimini red, 18" rims + Cooper LTZ, rear eLocker, Spider tuning box, GOE protection plates and rock sliders, GOE 3way shortened rods.
|
| 2nd Nov 2010 1:35 am |
|
|
|
|
Salty Spuds
Member Since: 05 Dec 2009
Location: The Peoples Republic of South Yorkshire
Posts: 86
 
|
LED trailer lights DO work, the only thing that you need to do is incorporate a ballast resistor across the indicators, otherwise the car doesn't detect the trailer. i.e dash trailer indicator doesn't work, suspension raises etc. If you can live with this then plug in & go.
|
| 30th Nov 2010 8:50 pm |
|
|
