DISCO4.COM - View topic - Delayed reverse take up.

Advertise on DISCO4.COM

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO4.COM > Technical (D4)

Delayed reverse take up.

Page 1 of 1

ronp

Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15211

2014 Discovery 4 3.0 SDV6 HSE Auto Corris Grey

Delayed reverse take up.

Getting the feel of the new D4 I've noticed that when I select reverse and depress the accelerator that there's a delay in response i.e. vehicle starting to move.
The epb is off btw.
Couple of times I've thought I've left it in 'P' or 'N'
Just seems not to have the instant pick up in comparison to my D3.

Anyone else experience this ? 🏴󠁧󠁢󠁳󠁣󠁴󠁿

21st Apr 2011 10:31 am

WOODY179

Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3634

It's happened a few times to me too, the D4's booked in at my dealers on Tuesday for a new rear door card and a new rear light unit (both were marked when I collected it) so I was going to ask them about this as well.

21st Apr 2011 11:21 am

devonchilliman

Member Since: 03 Nov 2008
Location: Devon
Posts: 5224

Yep

,noticed exactly the same on mine,especially when reversing up a slight incline Www.devonchilliman.co.uk

21st Apr 2011 11:25 am

ChrisA

Member Since: 02 Feb 2011
Location: Dorking, Surrey
Posts: 87

2011 Discovery 4 3.0 TDV6 HSE Auto Stornoway Grey

Yes sometimes a slight delay more so on an incline, same as devonchilliman.

6th Jun 2011 9:00 am

kenny

Member Since: 17 Jan 2010
Location: South West Aus
Posts: 79

2011 Discovery 4 3.0 TDV6 SE Auto Siberian Silver

Mine does it too, but I have only noticed it when pulling away at the boat ramp, after putting it in park. I just guessed that the car sensed it was hanging off the auto gearbox and automatically put the EPB on, though there are no lights to confirm this. The feeling when I put it in Drive and press on the accelerator is much the same as if I drive off with the EPB on

6th Jun 2011 12:20 pm

MJIbex

Member Since: 13 Sep 2009
Location: Reading
Posts: 195

2012 Discovery 4 3.0 SDV6 HSE Auto Firenze Red

Gradient release control - if only noticed on an incline - holds brake pressure to prevent roll downhill.

Mark.

6th Jun 2011 1:20 pm

AlanC

Member Since: 19 Jan 2011
Location: Hertfordshire
Posts: 39

2011 Discovery 4 3.0 SDV6 XS Auto Santorini Black

I get this every so often too. When reversing up a slight incline. Takes a sec to apply the power. In my case it's often while manoeuvring rapidly and I did wondered if it kept the power off until it was sure everything had stopped rotating forwards. Makes a bit of a slightly disconcerting noise too.

Doesn't GRC only apply when HDC is on?

9th Jun 2011 8:19 pm

mick

Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049

2010 Discovery 4 3.0 TDV6 GS Auto Santorini Black

Its something new they have added mainley for when you have a trailer on

9th Jun 2011 10:36 pm

Popelka

Member Since: 31 May 2008
Location: Praha (Prague)
Posts: 2430

MJIbex wrote:
Gradient release control - if only noticed on an incline - holds brake pressure to prevent roll downhill.

Mark.

I was going to say that as I have that even on the Skoda and still feels like a delay on a manual gearbox

but it works a treat when on inclines (no heel/toe driving)

Experience is a difficult teacher, because she gives the test first and then the lesson afterwards!!!!

10th Jun 2011 9:32 am

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO4.COM is independent and not affiliated to Land Rover.