Member Since: 24 Apr 2013
Location: Scotland/Glasgow
Posts: 72
Disco 3 tdv6. Starting problem
Hi. Guys. Got an issue from start.
I have have changed off side cylinder head gasket and reassembled. The engine is cranking but not firing. Could the camshaft be any problem with this or is there liable to be another issue involved with this problem. Any help would be very much appreciated. Thank you.
18th Oct 2020 1:43 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
Make sure fuel is coming out the tyre value at the back of engine
If not turn ignition on for 30 secs then off
Repeat
18th Oct 2020 1:58 pm
Alan1
Member Since: 24 Apr 2013
Location: Scotland/Glasgow
Posts: 72
Done this yesterday even loosened the feed to injectors the fuel seems to running through ok. Is there a right or wrong way to b put camshaft in, did not strip camshaft wheel of was removed complete.
18th Oct 2020 2:04 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
As long as you put the timing pins in the top cam wheels, should be ok.
Worth checking it’s still timed.
Did you remove the chain in the head ?
That’s important it’s aligned.
There are square marks in the cam which should align with the dark red chain links
Red links there to help. Don’t have to be used.
18th Oct 2020 2:11 pm
Alan1
Member Since: 24 Apr 2013
Location: Scotland/Glasgow
Posts: 72
Yes I put pins in the camshaft and realigned the chain to the grooves on each shaft.
18th Oct 2020 2:14 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
Hopefully mike will know.
It was just a head gasket failure was it for you to start this work ?
18th Oct 2020 2:16 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
Worth reading fault codes see if that gives clues
18th Oct 2020 2:22 pm
Alan1
Member Since: 24 Apr 2013
Location: Scotland/Glasgow
Posts: 72
Yes the head gasket failed as there was water and oil running out of the car from underneath. I managed to trace into the offside cylinder head. I think I might have to take the camshaft of again. Thank you.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum