philyourpants
Member Since: 14 Jun 2018
Location: Sheffield
Posts: 53
  
|
| Disco3 Halogen Headlights to Xenon (Bi Xenon?) |
|
I just bought some Xenon Headllights.
I have fitted them and updated the CCF file using my IID tool.
A friend has noticed that there is an extra halogen build next to the sidelight bulb and suggested that this a cornering lamp.
I tried to turn them on in the CCF files, but I can't the blessed things to work.
I know that there must be dozens of posts on the subject, but some are Disco 3 some Disco 4.
What is a Bi Xenon?
What do I need to do to get the cornering lamps to work?
And. Finally when should they work? ie turning the Steering or with Indicators?
Thanks ever so much (in anticipation)! EGR pipes blocked & refitted.
Butterfly valve removed.
Dash clock.
3 flash indicators.
Xenons with Cornering lights.
De-tangoed with Side marker lights.
Tinted windows.
'See me home' lights front & rear.
Cruise & Audio controls fitted.
Remote start FBH.
New belts & Oil pump upgrade.
Full length roof bars.
|
 18th Feb 2020 9:10 pm |
|
|
philyourpants
Member Since: 14 Jun 2018
Location: Sheffield
Posts: 53
|
I also have this symbol on the Dashboard... EGR pipes blocked & refitted.
Butterfly valve removed.
Dash clock.
3 flash indicators.
Xenons with Cornering lights.
De-tangoed with Side marker lights.
Tinted windows.
'See me home' lights front & rear.
Cruise & Audio controls fitted.
Remote start FBH.
New belts & Oil pump upgrade.
Full length roof bars.
|
| 18th Feb 2020 10:16 pm |
|
|
|
|
philyourpants
Member Since: 14 Jun 2018
Location: Sheffield
Posts: 53
|
Thanks Admirable.
Just what I needed.
I'll have a look for the Red Wire tomorrow.
Thanks again! EGR pipes blocked & refitted.
Butterfly valve removed.
Dash clock.
3 flash indicators.
Xenons with Cornering lights.
De-tangoed with Side marker lights.
Tinted windows.
'See me home' lights front & rear.
Cruise & Audio controls fitted.
Remote start FBH.
New belts & Oil pump upgrade.
Full length roof bars.
|
| 18th Feb 2020 11:02 pm |
|
|
philyourpants
Member Since: 14 Jun 2018
Location: Sheffield
Posts: 53
|
Hi Admirable,
With your help I've got the Cornering lights working - thank you!
I was getting confused with Adaptive lights.
My basic Disco3 has the red wire at pin 4.
All I really had to do was
Disable Adaptive
Enable Xenon
Enable Cornering 1 & 2
They now work a treat - with the Headlights on, engine running - indicated left or right and the Cornering light works great.
If I was to buy an Adaptive Controller of ebay and then enable Adaptive in the CCF file would the Adaptive headlights work with the steering when driving?
Thanks ever so much for your valuable assistance ! EGR pipes blocked & refitted.
Butterfly valve removed.
Dash clock.
3 flash indicators.
Xenons with Cornering lights.
De-tangoed with Side marker lights.
Tinted windows.
'See me home' lights front & rear.
Cruise & Audio controls fitted.
Remote start FBH.
New belts & Oil pump upgrade.
Full length roof bars.
|
| 19th Feb 2020 9:13 pm |
|
|
Admirable
Member Since: 19 Jul 2015
Location: Fife
Posts: 1011
 
|
I never took it any further as I didn't have the red wire and it would be a pain to fit it. I dare say you will need the adaptive module for them to work.
|
| 20th Feb 2020 3:28 pm |
|
|
