wubbajohn
Member Since: 18 Nov 2008
Location: cambridgeshire
Posts: 9
|
Drivers window not closing. |
|
Hi All
My drivers window on my 2007 D3 has stopped closing all the way to the top. It stops about 6mm from the top.
I assume it just needs resetting some how, any help would be appreciated.
Thanks in advance.
|
27th Mar 2011 7:37 pm |
|
|
mark_101v
Member Since: 31 May 2009
Location: North Wales
Posts: 121
|
Hi
This procedure might help. Hopefully!
Mark
--
To recalibrate the window position, close the window and keep the switch pressed for one second.
Anti-trap mechanism (front windows
only)
If the anti-trap sensor detects an obstruction
during window closing, the window will stop
and then open slightly. This will prevent a
window trapping vulnerable parts of the body
or other obstructions.
The anti-trap feature can be overridden by
attempting to close the window at intervals of
less than 10 seconds. On the fourth attempt the
window will move up a short distance with
increased force to try and move the
obstruction. If this fails to move the obstruction, anti-trap
will be disabled until reset.
To reset anti-trap, close the window and keep
the switch pressed for one second
|
27th Mar 2011 7:48 pm |
|
|
wubbajohn
Member Since: 18 Nov 2008
Location: cambridgeshire
Posts: 9
|
Have tried that a couple of times this morning but it doesn't seem to do the trick. I guess a trip to dealers is required.
Many thanks anyway
|
28th Mar 2011 11:00 am |
|
|