Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
eljot
Member Since: 15 Nov 2013
Location: wasserburg am inn
Posts: 90
|
EGR blanking MY08 without DPF |
|
After replacing both egr valves two years ago our Disco is trying to annoy us again with MIL on, rough idle, no acceleration from idle, egr failure code, etc!!
So now it is definitely time to blank the egrs!!
But after reading through nearly all of the egr-threads i am totally confused now what to do!!
We have a my08 disco without a DPF!
So just to get the my06 blanking kit and remove the butterfly valve? Or is there a ecu-patch required?
I have the nanocom evolution! Is there a patch for this diagnostic device?
Thx, martin SWMBO asked to get us a RELIABLE family car - I bought a Disco 3!
|
6th Jan 2019 9:36 pm |
|
|
tut_gareth
Member Since: 10 Dec 2018
Location: West Byfleet
Posts: 135
|
Have an 08 too and will be doing similar soon.
I believe that a software patch is needed to remove the egr function.
Though not found too much on software other than the BAS remap.
Blank the egr outputs with a plate and remove the butterfly. 08 D3 TDV6 SE
|
6th Jan 2019 9:55 pm |
|
|
eljot
Member Since: 15 Nov 2013
Location: wasserburg am inn
Posts: 90
|
I can remember to read something about a dongle from BAS?! Is it no longer on the market? SWMBO asked to get us a RELIABLE family car - I bought a Disco 3!
|
6th Jan 2019 9:58 pm |
|
|
tut_gareth
Member Since: 10 Dec 2018
Location: West Byfleet
Posts: 135
|
Not sure, but looking on the gap iid tools site i belive it can be done with one. Likely others too i would think. Nanocom?
I belive a reading of your engine map has to be taken, sent then returned modified?
Could be wrong though. 08 D3 TDV6 SE
|
6th Jan 2019 10:55 pm |
|
|
MikeO
Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1372
|
BAS offer an EGR removal map which can be applied with an IID but not a Nanocom. Another option is to get an EGR removal remap from a reputable company. Likely cost around £200-250. 2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone
|
6th Jan 2019 11:09 pm |
|
|
eljot
Member Since: 15 Nov 2013
Location: wasserburg am inn
Posts: 90
|
just a short update on my egr-issues:
car was nearly "undriveable"! no power below 2000rpm, white smoke after engine start vor approx. 20sec. (new glow plugs already installed last year), black smoke through all rpms, etc.!!
blanked both egrs yesterday and have a new car now!! smooth engine run, smooth and agile acceleration, ...!
found a near diesel-tuner to remap the disco to get rid of the MIL. no limp mode up to now!
i am quite happy with the car now! SWMBO asked to get us a RELIABLE family car - I bought a Disco 3!
|
10th Mar 2019 10:58 am |
|
|
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2080
|
As a matter of interest, will you have any problems with the next TUV test with blanked EGR's ?
|
10th Mar 2019 11:05 am |
|
|
keithj2286
Member Since: 18 Oct 2011
Location: Shropshire
Posts: 24
|
The BAS software for egr delete works perfectly. I think I was one of the first to get it several years ago on a Sept 2008 D3 D3 XS BAS Upgrade; GAPIIDbt; 4x4 screen enabled, sump guard, tree sliders, BFG tyres, TP front bumper, winch, off road ready
D2 TD5 Overlander spec sold!
D2 V8 lpg - long gone
Series 2a much missed
|
10th Mar 2019 11:27 am |
|
|
Leo Disco
Member Since: 22 Dec 2013
Location: Newcastle
Posts: 210
|
I also did the GAP IID map upgrade about a year ago. No problems since
|
10th Mar 2019 11:31 am |
|
|
eljot
Member Since: 15 Nov 2013
Location: wasserburg am inn
Posts: 90
|
in germany there are two different ways how they check the engine exhausts during the MOT:
cars with OBD2 are just checked for faults etc in the ecu (no engine run-up). BUT they check if the ecu memory was deleted within the last month (do not know exactly the time frame). If so, the MOT requires a standard engine run-up like for cars without OBD2.
The standard MOTs engine run-up just uses the exhausts with the engine in approx. 4000-5000rpm! where the egr valves are closed anyway! means that the MOT shouldnt be a problem.
my td5 is blanked since years and never got any problems at MOT.
martin SWMBO asked to get us a RELIABLE family car - I bought a Disco 3!
|
10th Mar 2019 11:35 am |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.