J6BXR
Member Since: 20 May 2009
Location: Ayrshire
Posts: 17
  
|
EPB
Red handbrake light flashing all the time, hand brake doesn't apply but makes noises (similar noises to when working OK) when attempting to apply/release EPB however no screeching, did originally.
Local dealer plugged in machine to say ' Eh the emergency release has been pulled ( which it hadn't) probably needs a module .........a b'trd to fit' This is an actual quote!
Any clues?? is it a clean and adjust or a new module?
also anybody got the tech fitting instructions for module?
Cheers
John
|
 2nd Sep 2009 8:01 pm |
|
|
mouse470
Member Since: 26 Aug 2009
Location: berkshire
Posts: 20
|
Could be just a simple case of clean and adjust but you cannot tell until the disks are off and you can get a good look at the shoes.
EPB modules/actuators are not that bad(there are definatly worse jobs to do)
but unless it has compleatly overheated(and this will be obvious from looking at the disks)
It's unlikely it will req a module
keep us posted or pm for any further info.
|
| 2nd Sep 2009 9:01 pm |
|
|
