Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Ok I've been to look at this for John and can confirm it won't pair,we tried a complete new set up with no joy,So come away to investigate a bit more knowing it's not a hardware issue,and as the Rugby was to shocking to watch tonight found myself looking at a wiring diagram not hard as its only 3 wires but this is what I found on Johns car which is different to the wiring diagram
On the vehicle plug that goes into the timed remote receiver on Johns car
Pin 1 purple/brown zero volts
Pin 2 red 12volts
Pin 6 earth
Wiring dia
Pin1 purple/brown 12v
Pin2 red signal
Pin6 Earth
So rigged up timed remote on my table,live and Earth and I should be able to pair remote,so rigged it up as johns car was ie pin 2 to live pin 6 earth and I can't pair remote so swap pin 2 to pin 1 as in the wiring diagram hey presto! I paired 2 remotes first time so I need to go back and check continuity between fbh red wire to the remote plug in the boot as there is a connector In between somewhere and I'm wondering if it's been incorrectly assembled,so in the meantime if someone has there D4 apart could you confirm that you have power to the purple and brown wire and not the red please or if someone can confirm of the top of there head that would be great,I know that's what the wiring dia shows but just want it confirmed Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
3rd Oct 2015 11:41 pm
HughMartin
Member Since: 30 Mar 2008
Location: Aberdeenshire
Posts: 751
I am helping out at a local event this morning but after lunch I will unplug my receiver and let you know what I find.
4th Oct 2015 8:45 am
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Thanks HM that would be great Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
4th Oct 2015 11:48 am
HughMartin
Member Since: 30 Mar 2008
Location: Aberdeenshire
Posts: 751
Hi Woody,
On my car I have
Purple/brown -12.8v
Red - 11.97v
Black - Ground.
That was with the connector disconnected from the receiver.
Let me know if there is any other check I can do to help.
4th Oct 2015 2:55 pm
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Thanks HM that's excellent
So looks like I'm looking for a fault in the purple & brown from fuse 2 in the eng fuse box back to the receiver.
Thanks again for your help much appreciated Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
4th Oct 2015 6:06 pm
HughMartin
Member Since: 30 Mar 2008
Location: Aberdeenshire
Posts: 751
Glad to have been of use. It's usually me looking for help
4th Oct 2015 8:13 pm
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
It's helped me no end as it's taken me straight to the fault knowing that Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
5th Oct 2015 11:29 pm
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Update/Repaired
Ok a little update on this,so been back to sort this issue of not being able to pair the timed climate remote
Drawing
The purple/brown wire at the receiver,as you can see is feed by battery voltage from fuse 2 in the eng bay,the only join between fuse 2 and the receiver plug is a connector about 1 meter from the fuse box,trying to find this connector was a challenge but I finally found it,so for others that may need to find connector C2410R/C2409 it's behind the CJB near the bottom,and yes a bitch to get to and visible by mirror or a pea sized head,I managed to Unclip the connector from its mounting point but the looms so tight you can't move it much but it was enough for me to find and repair the fault.
And this is what I found.
So a bit of a random fault but may help someone out one day
And a big thanks to hughMartin for checking his voltages for me as I didn't have a drawing at the time great help cheers mate Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
10th Oct 2015 12:30 am
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Greg that's for all them brain cell things
It's In the title Greg REPAIRED and not a bodge lock in sight managed to get a pair of long nose pliers on it and push it back in
Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
being of a much smaller frame / head width ( the glasses fit me ) I may have taken a slightly different approach Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
10th Oct 2015 12:48 am
dc130john
Member Since: 08 Sep 2015
Location: Somerset
Posts: 70
Just wanted to give a massive thanks to Kris, absolutely top man and very professional, his help was greatly appreciated. Cheers Kris and all who replied on the thread,D4 3.0 TDV6 HSE Galway Green Black Leather Adaptive Xenons Logic 7 TV Pre-heater
IID BT
Discovery 5 HSE R Dynamic 3.0 Ingenium Santorini Black 2024
Devon & Cornwall 4X4 Response
Dorset & Somerset Air Ambulance
2EODZT Amateur Radio Call Sign
17th Oct 2015 3:33 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
beanie wrote:
Kris, scotch lock the two together
Wash your mouth out - those things belong in the bin!
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
dc130john wrote:
Just wanted to give a massive thanks to Kris, absolutely top man and very professional, his help was greatly appreciated. Cheers Kris and all who replied on the thread,
Thanks John it was nice to have something a bit different to get your teeth into glad your happy mate
Robbie
Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
found myself looking at a wiring diagram not hard as its only 3 wires but this is what I found on Johns car which is different to the wiring diagram 
that would be great 
and not a bodge lock in sight 
glad your happy mate 
