Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D4)

Is it possible to 'level' the car using the air suspension?
Post Reply  Down to end
Page 1 of 1
TwoSheds
 


Member Since: 11 Sep 2018
Location: Royal Deeside, in a cottage on a hill
Posts: 25

Scotland 2013 Discovery 4 3.0 TDV6 HSE Auto Sumatra BlackDiscovery 4
Is it possible to 'level' the car using the air suspension?

Hi,

I have been known to sleep in the back of the D4 and I plan to do more.

Sometimes if the ground is uneven or sloping it can be a problem getting the car level.

So I thought that it might be possible to individually control the air suspension so as to level the car. Or even, since I am sure that the car has sensors for 'levelness' Very Happy it should be possible to ask the car to level its self?

Apologies if this has been covered, but I did try to find it... honest! (If it has been covered, I would appreciate a link to it please Very Happy )

Rog
 Disco4, Disco2, R1200R, CBX600FX, multiple Ham radios, and several bicycles...

All that lot and a tool fetish means that I seldom have more than two brass farthings to rub together. 
 
Post #203690814th Mar 2019 11:07 am
View user's profile Send private message View poster's gallery Reply with quote
Famousfive
 


Member Since: 12 Aug 2014
Location: Southampton
Posts: 1806

Ukraine 2013 Discovery 4 3.0 TDV6 GS Auto Loire BlueDiscovery 4

Easy with the IID Tool yes as you can program in the 4 corners and then put back to default in the morning Thumbs Up
 Stolen - D4 Loire Blue
D4 Bali Blue 
 
Post #203691414th Mar 2019 11:20 am
View user's profile Send private message View poster's gallery Reply with quote
TwoSheds
 


Member Since: 11 Sep 2018
Location: Royal Deeside, in a cottage on a hill
Posts: 25

Scotland 2013 Discovery 4 3.0 TDV6 HSE Auto Sumatra BlackDiscovery 4

That's perfect! Thanks Famousfive... I was under the impression that the IID tool could only do it by axle.

Cheers
Roger
 Disco4, Disco2, R1200R, CBX600FX, multiple Ham radios, and several bicycles...

All that lot and a tool fetish means that I seldom have more than two brass farthings to rub together. 
 
Post #203696614th Mar 2019 3:39 pm
View user's profile Send private message View poster's gallery Reply with quote
Pedros
 


Member Since: 25 Jun 2011
Location: Cumbria
Posts: 454

United Kingdom 2010 Discovery 4 3.0 TDV6 XS Auto Santorini BlackDiscovery 4

I thought if you park somewhere and switched off, it'll automatically endeavor to level the vehicle after a minute or so, (just to frighten passers-by).
  
Post #203706614th Mar 2019 10:09 pm
View user's profile Send private message View poster's gallery Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

If your on a slope and want to get the car level you need one of these

https://www.xlifter.com

Great bit of kit Thumbs Up

Fully automatic.. just press a button and it will level its self ( as well as lots of pre set suspension heights )










  
Post #203707514th Mar 2019 11:16 pm
View user's profile Send private message View poster's gallery Reply with quote
ostosix
 


Member Since: 19 Mar 2017
Location: Lincoln
Posts: 305

United Kingdom 2005 Discovery 3 TDV6 SE Auto Tonga GreenDiscovery 3

Although that initially looks exspensive i can see it being heavenly once in use. Looks well thought out too.
  
Post #203708415th Mar 2019 12:51 am
View user's profile Send private message View poster's gallery Reply with quote
Weyboat
 


Member Since: 13 Apr 2018
Location: Weymouth
Posts: 261

England 2015 Discovery 4 3.0 SDV6 HSE Auto Corris GreyDiscovery 4

Pedros wrote:
I thought if you park somewhere and switched off, it'll automatically endeavor to level the vehicle after a minute or so, (just to frighten passers-by).

That was my understanding also?
 Gone 2016 Landmark D4
Current 2015 HSE D4 - AKA - 'Gandalf the Grey' 
 
Post #203717815th Mar 2019 11:54 am
View user's profile Send private message View poster's gallery Reply with quote
TwoSheds
 


Member Since: 11 Sep 2018
Location: Royal Deeside, in a cottage on a hill
Posts: 25

Scotland 2013 Discovery 4 3.0 TDV6 HSE Auto Sumatra BlackDiscovery 4

Self leveling when parked? I'll test it and get back to you, but I can't say that I have noticed...

WRT the XLifter, Thanks for linking to it Wiggs, it looks really good but I won't be getting one for the following reasons:
1. It is VERY expensive and would be used only rarely
2. I think that (bearing in mind point 1 above) I can get away with fore-aft leveling which is available through the IID (which I already have).
3. The Xlifter has writing on it which basically say 'for off-road use only', and (since it is semi-permanently attached to the car) I wouldn't feel comfortable driving around with it for insurance reasons.

I intend therefore, that if I need to camp on some kind of a slope, I would park so that the car is level side to side, then fit the IID and level up the fore-aft slope. Then before driving away I can reset the suspension and remove the IID. This is nowhere near as convenient as the XLifter, but I think that it will do for me.

Many thanks for the replies everybody!

Roger
 Disco4, Disco2, R1200R, CBX600FX, multiple Ham radios, and several bicycles...

All that lot and a tool fetish means that I seldom have more than two brass farthings to rub together. 
 
Post #203718615th Mar 2019 12:28 pm
View user's profile Send private message View poster's gallery Reply with quote
Brucey
 


Member Since: 24 Oct 2015
Location: Bedfordshire
Posts: 137

2012 Discovery 4 3.0 SDV6 XS Auto Indus SilverDiscovery 4

You can control individual corners with the IID tool
  
Post #203734315th Mar 2019 10:16 pm
View user's profile Send private message View poster's gallery Reply with quote
PCT3
 


Member Since: 13 May 2017
Location: Kent
Posts: 144

England 2007 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

Go to a camping shop buy a couple of levelling ramps cheap only need when your camping not heavy, it’s the way most motor homes are levelled
 Discovery 3 HSE 07
Discovery 1, Search & Rescue SE4x4 Responce
Fiat Decato motor home
Mazda MX5 
 
Post #203737116th Mar 2019 8:36 am
View user's profile Send private message View poster's gallery Reply with quote
TwoSheds
 


Member Since: 11 Sep 2018
Location: Royal Deeside, in a cottage on a hill
Posts: 25

Scotland 2013 Discovery 4 3.0 TDV6 HSE Auto Sumatra BlackDiscovery 4

Famousfive wrote:
Easy with the IID Tool yes as you can program in the 4 corners and then put back to default in the morning Thumbs Up

Brucey wrote:
You can control individual corners with the IID tool


Thanks for this, gentlemen. But do either of you have a link to any info on how to do it? I have looked at the Gap IID instructions and, if it is there, then it is not clear to me I'm afraid...
 Disco4, Disco2, R1200R, CBX600FX, multiple Ham radios, and several bicycles...

All that lot and a tool fetish means that I seldom have more than two brass farthings to rub together. 
 
Post #203771317th Mar 2019 2:45 pm
View user's profile Send private message View poster's gallery Reply with quote
Famousfive
 


Member Since: 12 Aug 2014
Location: Southampton
Posts: 1806

Ukraine 2013 Discovery 4 3.0 TDV6 GS Auto Loire BlueDiscovery 4

From faq on Gap website https://www.gap-diagnostic.com/faq/



Quote:


Is it possible to manually control the air suspension?
Or, can the IIDTool help when the suspension becomes inoperative? Can it close any specific valve for any corner and keep it closed while you limp off the trail?

Yes. For example, when an air strut fails, the suspension ECU detects a major fault since it is not able to raise the corner. In some cases, it lowers all corners to the bump stops. The lowering may be caused by the air leak itself since on normal operation, corners are adjusted in pair.

To manually control the air suspension, proceed with the following:

IIDTool Menu->Service Test->Suspension->Test Valve->Adjust Front, adjust to the desired height
IIDTool Menu->Service Test->Suspension->Test Valve->Adjust Rear, same as above
Each corner can be adjusted independently if needed
Keep in mind that raising both axles using Adjust All is not recommended since it takes much longer to reach the desired height. This is because the pressure equalizes when all four corner valves are opened (air goes from the front airbags to the rears) thus increasing the time required to raise the front axle.

If you are raising the vehicle significantly, the compressor may need to cool down before it can pump additional air in the system.

Once the desired height is reached, exit Test Valve mode and disable the suspension: IIDTool Menu->Service Test->Suspension->Build Mode

When finished, simply put it back into customer mode by calling the Build Mode function once more: IIDTool Menu->Service Test->Suspension->Build Mode

Not raising all four corners will put the vehicle out of balance and this can cause a safety hazard. We do not recommend driving an unstable vehicle but it can be useful to recover the vehicle with a defective EAS while offroad. Do not drive an unstable vehicle at high speed.
 Stolen - D4 Loire Blue
D4 Bali Blue 
 
Post #203783217th Mar 2019 8:15 pm
View user's profile Send private message View poster's gallery Reply with quote
TwoSheds
 


Member Since: 11 Sep 2018
Location: Royal Deeside, in a cottage on a hill
Posts: 25

Scotland 2013 Discovery 4 3.0 TDV6 HSE Auto Sumatra BlackDiscovery 4

Thanks for that FamousFive - I had seen that bit but hadn't linked it in my mind to the fact that you can us that technique to adjust the corners.

Cheers everybody for the replies Smile
Rog
 Disco4, Disco2, R1200R, CBX600FX, multiple Ham radios, and several bicycles...

All that lot and a tool fetish means that I seldom have more than two brass farthings to rub together. 
 
Post #203803218th Mar 2019 1:16 pm
View user's profile Send private message View poster's gallery Reply with quote
Panoramix
 


Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3247

Italy 2013 LR4 5.0 V8 HSE Lux Auto Alaska WhiteLR4
Re: Is it possible to 'level' the car using the air suspension?

TwoSheds wrote:
...So I thought that it might be possible to individually control the air suspension so as to level the car. Or even, since I am sure that the car has sensors for 'levelness' Very Happy it should be possible to ask the car to level its self?


Yes, you can do it Wink

https://www.easylift-eas.com/





 

Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time Smile
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress Smile 
 
Post #206011710th Jun 2019 2:26 pm
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site