Young Bodsy kindly fitted an Altox unit onto my FBH 2 years ago and is been great. Love it to bits
Now though, this winter I’m getting a fault on my FBH. Code 22. (Nothing to do with the Altox).
I have been researching in here. And believe it’s probably the hours of operation counter that needs to be reset as my vehicle is 2007 .. if this FBH is original. It’s probably done a few hours service.
As I understand it. I need some sort of interface cable. But here is where I’m stuck. What cable do I need and where do I get one. I don’t think I see it on the club site anymore..
Didn't Martin say, in another thread, he had the bits back in stock? Try PM'ing him..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
4th Dec 2023 5:37 am
Worms
Member Since: 24 Sep 2023
Location: Highlands
Posts: 267
NCC, I thought I had read everything across all the threads on here about the FBH, but the operation counter issue is a new one to me! If you can find a link to that thread, please post it! I'm away from home for a couple of days, without the laptop that I use for the Webasto software, so I'm afraid I can't investigate whether resetting the counter is an option.
Mine runs really well on the test software but won't run when commanded by the car itself. I fired it up on the test software at the weekend but had to pull the fuse to get it to stop - with the FBH coolant at 94C and the engine coolant at 91C, I was starting to get worried! Learning point was: don't use the software to start it up then disconnect the laptop before shutting it down - if you switch it on manually, it needs the manual instruction to switch it back off! I've since found that it seems to shut off with a FBH coolant temp of 95C, which is way higher than I expected. I had naively expected it to cut-out when the engine coolant temperature reached 70C, or at least when I switched off the engine!Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel
4th Dec 2023 8:18 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18452
Code 22 is “reference resistance” error, not hours worked.
Thanks. I was looking it the Altox app. And it shows engine use at 598 hours. Against a milage of 127,000. Which I work out as an average speed of 220ish mph ! So that’s not a correct read . And at an average of 40mph I believe that is 3,175 hours So it’s plausible it’s reached 800 hours on the fbh.
Click image to enlarge
4th Dec 2023 3:28 pm
Worms
Member Since: 24 Sep 2023
Location: Highlands
Posts: 267
Thanks for that link - I had indeed read it once before, but disregarded it since I was pretty sure that my FBH was actually ok. But thinking about it again, it might well explain the reason why it can start on the Webasto test software and on the IID, but not from the car's instructions. I'm not seeing an error code on the WTT software, though... Not sure if I am brave enough to attempt the fix!
Edit: Still thinking aloud on this. I need to check the hours on mine, but surely if the hours were exceeded, it wouldn't run through the start process at all? Mine switches the circulation pump on, then the glow plug, then shows the fuel pump on, then shuts fuel pump off at 10s, then the glow plug. Circulation pump remains running, then after a minute or two it runs through, the glow plug on, fuel pump on cycle for the second restart time, before shutting down in sequence again, this time putting the circulation pump back off and recording the "No start after restart" error on the IID. If I run the prime function on IID, it burns off the primed fuel, but still shuts the fuel pump off at 10s. With the WTT it burns clean, hot and long, so I am pretty sure that all the components are working well.Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel
Honestly wish I knew. Don’t think my Gap tool shows any issues with the fbh. But I get error 22 from the remote start… (I don’t know how to start it without the Altox system…).
Hoping getting the WTT software connected will tell me something.
Steve
4th Dec 2023 4:05 pm
Worms
Member Since: 24 Sep 2023
Location: Highlands
Posts: 267
It is worth watching the live values on the GAP Tool during start-up. I find that Glow plug status, Fuel pump status, circulation pump, FBH coolant temperature (from the FBH menu) and engine coolant temperature (from the engine menu) give a good indication of what is going on. If you simply watch these during initial start-up on a cold morning and then try that again with the Altox, you might be able to see at what point the FBH is not responding when simply commanded on start-up.Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel
Couldn't see the live values, howevrer - i did a test from the IID tool and teh FBH stared up fone , load of smoke, all looks good - flicked into the Altox app and saw the burner switch to flame ON.
so that looks ok
4th Dec 2023 6:06 pm
Worms
Member Since: 24 Sep 2023
Location: Highlands
Posts: 267
Sounds like you are in the same boat as me, then. Works fine on an over-ride command but not in normal start-up operation. I suspect you may be onto something with the Operating hours reset.
I'll be back home on Wednesday and will see if I can get time to delve into the Webasto software again to assess whether I am brave enough to modify the hours figure.
Edit: Having read and re-read Spiderlane's description, I am now more confident that I will be able to calculate and (hopefully) find the correct figures on the WTT data, rather than blindly assuming that the locations to be edited are the exact same.Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel
Sound like you can help when @Martin has sourced me a cable.
4th Dec 2023 7:28 pm
Worms
Member Since: 24 Sep 2023
Location: Highlands
Posts: 267
...or vice versa when I've "bricked" my FBH! Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel
4th Dec 2023 9:24 pm
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2210
Hi,
not sure if this will help you any but its a pic of my old RRS showing the op hours as 4267 hours and it was still firing up
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
... All LED interiors lights, DRLs, Spare Wheel protector.
Learning point was: don't use the software to start it up then disconnect the laptop before shutting it down - if you switch it on manually, it needs the manual instruction to switch it back off! 
I've since found that it seems to shut off with a FBH coolant temp of 95C, which is way higher than I expected. I had naively expected it to cut-out when the engine coolant temperature reached 70C, or at least when I switched off the engine!
Not sure if I am brave enough to attempt the fix! 
