r6rym
Member Since: 23 Feb 2009
Location: Luxembourg
Posts: 4
|
Hi guys new here with my Disco 3 in Luxembourg. Saw one of your stickers on a well used D3 at the dealers here the other day when they replased the air compressor for my suspension which had packed up.
Anyhooo..... Missus cracked the rear high level brake light, need to get it replaced, is this something I can do and where is a good place to get a replacement as I am in the UK this week ?
Thanks! There are only 10 people that understand binary here, me and you....
|
23rd Feb 2009 1:31 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
Its bonded in , but can be replaced by
Carefully cut through the sealant using a glazing knife.
Disconnect the electrical connector.
Disconnect the washer jet hose.
Clean up the old sealant ..apply some primer if the paint has come off ..apply sealant and stick it back in
(Sealant comes with new lamp i believe )
Disount for forum members from Yeovil LR ..Nick on here is the parts manager ...he can be contacted here
http://www.disco3.co.uk/forum/member2459.html
Welcome to the site by the way G4 Gone ...but not forgotten
|
23rd Feb 2009 6:26 pm |
|
|
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
|
I did mine. Only way to get the old one off is to grind it off. Be very careful not to grind the paintwork. When installing new one make sure you prime the plastic underside before installing or it will not stay on for too long. “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
23rd Feb 2009 10:32 pm |
|
|
r6rym
Member Since: 23 Feb 2009
Location: Luxembourg
Posts: 4
|
Many thanks for the help guys! There are only 10 people that understand binary here, me and you....
|
9th Mar 2009 1:24 pm |
|
|