Member Since: 05 Mar 2011
Location: chengdu
Posts: 1542
Recal done
Recal done took about 10mins booked for 40
Connect to computer..rev.idle.rinse repeat
All clear.
Click image to enlarge
It is better to have and not need it then need and not have it.
29th May 2019 3:29 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72775
I wonder if this is an exercise in paperwork, ie we’ve checked on the pooter and your car is fine so if your engine does go bang then it’s your fault, not theirs. Plus will prob blame driving style.
29th May 2019 3:44 am
Kelvo
Member Since: 07 Aug 2015
Location: Perth WA
Posts: 264
Did they say what they were looking for?
I wonder if they are monitoring the injector values.MY14 TDV6
29th May 2019 5:57 am
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
Re: Recal done
amazing wrote:
Recal done took about 10mins booked for 40
Connect to computer..rev.idle.rinse repeat
All clear.
Click image to enlarge
Could you translate the phrase on the popup windows?
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26699
Isn’t there a danger that you might blow out some seals and gaskets with that?
Personally I’ve been looking at installing a simple mechanical old school oil pressure gauge. It looks like it might be possible to fit a T piece to the current oil pressure switch orifice, and then fit the switch and gauge pressure pipe to it.
Personally I’ve been looking at installing a simple mechanical old school oil pressure gauge. It looks like it might be possible to fit a T piece to the current oil pressure switch orifice, and then fit the switch and gauge pressure pipe to it.
I too have been looking at this - could we please have a separate thread, and maybe ultimately a group buy?
NJSSAm I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
29th May 2019 11:57 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
humm.
you maybe able to get a comined oil light and gauge output signal. THey do exist.
The location on the tdv6 is a pain for doing these things. unless you fit it else where.
Thinking about it, maybe someone did that already on here.
Joe from Oval Autos wrote somewhere about monitoring kit they fitted to Discos which they were testing after fitting a rebuilt engine.
What we could do with is some way of measuring & displaying oil pressure, or at least giving a warning in the form or a light or warning sound, preferably both, when the oil pressure drops.
As has been said access is difficult for something physical; could we more easily access the Disco's electronics for this purpose.
I think many D4 & D3 members would be prepared to buy a suitable solution.
NJSSAm I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
29th May 2019 12:21 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
there is no oil pressure sensor so that cars electronics can't display it.
You already have an engine oil light. I know its more of a "replace engine light"
Old vauxhalls used to have a 2 stage light. Dim when it was getting near the limit. and bright for the normal function.
The problem is that when the oil is hot and the engine idling, there isn't a massive difference between normal and low.
I recall Metro MG Turbo's disabled the fuel pump when there was no oil pressure. But on a D3 there would be too much delay.
I don't know what you expect to acheive anyway.
There is no early warning sign. As soon as the shell rotates and blocks the oil way, it is game over.
THere is no early warning. I'm not even sure the oil light would come on. As oil is still reaching other places I assume
29th May 2019 12:37 pm
knwatkins
Member Since: 19 Sep 2018
Location: Poole, Dorset
Posts: 716
NJSS wrote:
Joe from Oval Autos wrote somewhere about monitoring kit they fitted to Discos which they were testing after fitting a rebuilt engine.
What we could do with is some way of measuring & displaying oil pressure, or at least giving a warning in the form or a light or warning sound, preferably both, when the oil pressure drops.
As has been said access is difficult for something physical; could we more easily access the Disco's electronics for this purpose.
I think many D4 & D3 members would be prepared to buy a suitable solution.
NJSS
This is Joe's pressure dials connected up to my TDV6 in the RRS. It's nothing flashy, but does the job it needs to do. The oil pressure is measured at two points: at the oil filter housing using an oil filter cap that has been fitted with a sensor and then somewhere lower down in the engine which I'm not sure about.
On his test & development engines, he also measures the pressure in a third place I believe.Kev
MY2014 L405 RR Vogue SE 4.4 SDV8 in Corris Grey
MY2010 L320 RRS HSE 3.0 TDV6 in Stornoway Grey
NJSSAm I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
29th May 2019 1:00 pm
Kelvo
Member Since: 07 Aug 2015
Location: Perth WA
Posts: 264
Re: Recal done
dgardel wrote:
Click image to enlarge
Could you translate the phrase on the popup windows?
Click image to enlarge
[/quote]
A quick, crude, transition,
Top line says ‘Test passed’
Bottom line says ‘Carry on using it as recommended by the operating manual’MY14 TDV6
29th May 2019 1:07 pm
Rnclayton
Member Since: 13 Apr 2018
Location: Radstock, Bath
Posts: 564
I wonder if that code - 570578 is the test that they do?MY07 Freelander2 SE Santorini Black - Gone
MY10 D4 XS Buckingham Blue
MY06 D3 HSE
29th May 2019 1:14 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
Re: Recal done
Kelvo wrote:
A quick, crude, transition,
Top line says ‘Test passed’
Bottom line says ‘Carry on using it as recommended by the operating manual’
Thank you mate! Discovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition IID Pro MV License
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
a group buy?
I know its more of a "replace engine light"
