Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Thanks Anglefire, thats what I love about this forum, lots of eagle eyed people!! I'll research the update and get onto it asap!
Yeah that sure is my D3 on the supertints site, after seeing the picture I wish I'd washed it before hand, although I think he's going to change it to a better picture now! And one that hides my reg!!
No Chelsea tractor here Armalites, I bought it to be used and used it will be!
Fishinmad - I guessed this might be the issue but with spending out over christmas and everything I'm hoping I can prolong the inevitable for as long as possible so I can claw some money back in first!!Expensive job I'm guessing?!!
3rd Jan 2015 12:01 am
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Me and the misses went out for a Little jolly today In Vinnie, nothing too exciting just a bit of exercise after too much christmas eating! It's amazing to eventually be doing these kind of things in a Land Rover and not cramped in a small hatchback, making a hot chocolate at the end of the outing was a pleasure with the drop down tailgate!!
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Last edited by Iceman08 on 7th Jul 2017 5:50 pm. Edited 2 times in total
3rd Jan 2015 12:29 am
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Todays gift to Vinnie arrived 8)
Click image to enlarge
Click image to enlarge
Now to get my coat on and go playing
Last edited by Iceman08 on 7th Jul 2017 5:52 pm. Edited 1 time in total
5th Jan 2015 8:37 pm
armalites
Member Since: 17 Aug 2013
Location: Herefordshire
Posts: 1918
Now you have everything you needIID PRO
MSV Extreme
Nanocom One
5th Jan 2015 8:40 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Everything I need................what about the Narpy grill, D4 rear lights, AT tyres, D4 bluetooth module?!!!!!!! Ok maybe I just want them!!
So far tonight I've enabled the 4x4 info screen, clock on dash, rear going home lights and Canadian driving lights with my new IIDTool Cant wait to get out and do some more juicy updates!!
6th Jan 2015 12:04 am
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
I was also getting a fault code that wouldn't clear, can anyone shed some light on what it means for me please?!
Vehicle scanned on 05-01-2015 21:19
Using IIDTool BT V3.0 B1660
Body Control
B1C57-14 (2F) Passive start ignition relay coil circuit - General electrical failure - circuit short to ground or open
6th Jan 2015 12:31 am
maplecottage
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
If my memory serves me correctly - this code is a bit of a 'ghost' and commonly found with no rhyme nor reason for its presence.
Advice previously has been - ignore it.
If someone comes along with a better explanation - hats off to them
Steve
6th Jan 2015 3:45 pm
Dave
Member Since: 08 Mar 2006
Location: North Yorkshire
Posts: 2462
Iceman, great journey so far, I will be up for an IID BT myself soon too
Did the Dr Tranny sort the uphill judder please?Captain Nick Medhurst would ask:
"What is the first rule when overlanding?"
I would Reply:
"Duratrac"
6th Jan 2015 4:04 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
maplecottage wrote:
If my memory serves me correctly - this code is a bit of a 'ghost' and commonly found with no rhyme nor reason for its presence.
Advice previously has been - ignore it.
If someone comes along with a better explanation - hats off to them
Steve
Thanks for that info, as long as it's not harmful I'd much rather leave it than spend more money!! I just noticed it's the only one that won't clear!
6th Jan 2015 4:11 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Dave wrote:
Iceman, great journey so far, I will be up for an IID BT myself soon too
Did the Dr Tranny sort the uphill judder please?
Thanks mate, I want to try and document everything as it'll be nice to look back on years down the line! I was going to pay to have some updates done then when I did the maths it came to half the price of the tool, so I bought one!
Yeah Dr Tranny did the job, fingers crossed it stays this way for a while
6th Jan 2015 4:15 pm
Biker Pete
Member Since: 23 Jan 2014
Location: Gateshead
Posts: 513
Great write up and I am glad you are enjoying Vinnie
The only downside I have is my Labrador is blind so I have to pick up a muddy mutt and lift her in
7th Jan 2015 1:21 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Thanks mate
Aww bless her, it's in your interest to keep her weight down then!! On occasions I lift mine in just to help out on her joints a bit in years to come, but I don't appreciate the muddy sleeves in return tho!!
Last edited by Iceman08 on 8th Jan 2015 10:03 pm. Edited 2 times in total
8th Jan 2015 9:46 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
As pointed out to me by Anglefire I still have the original diff breather which is prone to blocking. So yesterday at 13:30 I placed my first ever order with Advanced Factors............and it arrived today at 09:30 Now thats what I call good service
Click image to enlarge
Another issue which I think will need addressing soon is my FBH, it fires up and works fine every time, except for this cloud of smoke.
Click image to enlarge
Is there something I should do myself to try and make this better or is it a throw it away and start again job?
Last edited by Iceman08 on 7th Jul 2017 5:53 pm. Edited 1 time in total
8th Jan 2015 10:02 pm
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
Mine does exactly the same mate they all do that!
It has got a bit better since I set up my FBH remote and got it running a lot more regularly but still a fair cloud when it first fires.
Only fix is a new one (£150 from duckworthparts if they still have any) or strip yours down and decoke. Can try a bit of brake cleaner in the inlet (don't have your washing on the line!)
8th Jan 2015 10:37 pm
armalites
Member Since: 17 Aug 2013
Location: Herefordshire
Posts: 1918
Mine had never smoked at all not even a hint and ran cleanly every time. Then just before Xmas it started smoking big time. It was so bad I couldn't leave it running while stopped unless I put recirculation on or it filled the car with diesel fumes.
I was always a bit disappointed that mine never gave any indication that is running apart from the smell and I could feel the heat from the exhaust, that disappointment some went when it started smoking
Was going to strip and clean it but at £150 delivered I ordered an new one from Duckworths. I will clean the old one and keep as a spare. I suspect my old one has an air leak because it always ran clean and the change was instant not over time. When mine started smoking the exhaust silencer on the FBH was leaking smoke also so a new one made good sense as an exhaust is £80.
Fitting is fairly easy once you get at it.
Grill out,NS Headlight out,NSF wheel arch trim remove,inner arch liner remove,10mm clamp on the exhaust in the wheel arch loosen and slide bottom pipe off,fuel pipe clipped beside air spring mount(slide cover up and press down clamp to remove pipe),release electrical connectors from FBH and ease cable clamps from the mount.Clamp the coolant pipes and slide the clamps off with pliers or correct tool. 4 bolts hold the FBH in, with the PAS reservoir remove from it's mount you can move everything out of the way and jiggle the FBH out loosening the top exhasut clamp gives a bit more movement(there is also a cable loom clipped to it's black plate that gets in the way)
Fitting is just the reverse, put some masking tape over the fuel pipe so no dirt gets in as you route it and top up the coolant when done.
After a prime with the IID mine fired first time, no smoke, happy days IID PRO
MSV Extreme
Nanocom One
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Now thats what I call good service 
