Member Since: 28 Aug 2008
Location: essex
Posts: 4
Multiple fault messages
I recentley replaced my centre console without incident or so i thought. On re-assembly i started the car but im getting multiple error messages ranging from transmission fault to park/brake fault.
Other than the park brake not working, it still drives ok bar the fact that you need to manualy press the park release switch to allow it to engage your chosen gear.
I got a load of similar fault messages when I turned the vehicle on without the aircon control unit plugged in. Did you re-connect all the plugs correctly? I'm not sure what you had to disconnect for the centre console work, but worth re-checking all the connectors.Previously:
2005 D3 2.7 TDV6 S
1984 90 2.25 Petrol CSW
1992 90 200TDi Hard Top
1995 Discovery ES 300TDi
2003 90 TD5 Truck Cab
9th Mar 2009 2:34 pm
matthewpotter
Member Since: 28 Aug 2008
Location: essex
Posts: 4
i disconnected the battery, HDC switches, Park Brake and a couple of other large connectors and the gear shift surround. Also shows a big 'F' on the display
Thinking about it, they were also disconnected when I got the messages, but cleared once I'd reconnected. Sounds like one of them is not seated correctly. If you can't find which one, may be a trip to the dealer who can tell where the problem is with their diagnostic gear.Previously:
2005 D3 2.7 TDV6 S
1984 90 2.25 Petrol CSW
1992 90 200TDi Hard Top
1995 Discovery ES 300TDi
2003 90 TD5 Truck Cab
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum