Haven’t been on here for a while as my car has been behaving so well, until the last few months.
I’ve had ongoing suspension issues and on my 3rd suspension compressor.
I’ve replaced the valve block with no joy followed by the front two struts again with no joy.
Before replacing the struts and valve block I removed the fuse and in the morning the front two wheels had lowered while the back stayed up in the same position.
It’s a 2006 hse tdv6.
Today for the first time the red suspension light followed by default suspension max 30mph.
I will attach photos of the codes my gap tool bought up.
Desperate for some help as I don’t know where to go from here. I’ve ordered another suspension compressor and rear valve block in hope it’ll help.
I also had a code come up for my heaters which wasn’t working and I did a reverse flush which allowed one vent to start working.
Thanks in advance.
Discovery 3 HSE 2007
5th Mar 2021 7:41 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1782
I would start with the front valve block connections and see if they are connected up properly. Remove plug and check pins also check where it plugs into for cleanliness.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum