sbarnham
Member Since: 07 Nov 2007
Location: Blue Mountains
Posts: 103
|
countrywide wrote:Spoke to Parrot and they said to call www.vstore.co.uk and they would be able to supply the parts as they do all the Parrot after sales service etc. In then end I needed 2 cables, which is a direct plug and play including power source.
INKA-027-4480 - D3 Adapter £25.99
INKA-024-9934 - Parrot to Nokia Adapter £7.99
You can also get a Brondit bracket, but I didn't bother with it.
Installed the MIC and display today, so just need the cables tomorrow to finish the install.
Are these leads for the HI ICE Harmon Kardon ? Not the base, and not the Logic 7, the middle spec is what I have ?
Wondering if I use these leads rather than the dodgy solder-to-the-speaker-wire the installer did, then my noise on unmute will go away ?
(See second last post on this page http://www.disco3.co.uk/forum/topic12450.html ) New MY15 TDv6 D4 in Buckingham Blue
Previously 2005 TDV6 HSE in Cairns Blue
- LR Steel Bar & Lights, Cooper STT 245/70R17 on LR 17", ContiCrossContact UHP 255/60R18 on LR 18", Traxide/Optima Yellow Top, GME 3440 UHF, FrontRunner Roofrack.
Previously 1999 TD5 in Blenheim Silver
|
 14th Aug 2008 11:30 am |
|
|
sbarnham
Member Since: 07 Nov 2007
Location: Blue Mountains
Posts: 103
|
sbarnham wrote:
The problem I have is whenever the Parrot hands back to the stereo (unmutes) I get a really loud noise in the drivers speaker.
I got an iPhone G3 and it unmutes silently now !! Go figure !!!
Only problem now is that when I make a call, my 3200 turns the volume to minimum. I have to turn it up after the person answers EVERY call. Is that a setting ? Or wierd bug ? New MY15 TDv6 D4 in Buckingham Blue
Previously 2005 TDV6 HSE in Cairns Blue
- LR Steel Bar & Lights, Cooper STT 245/70R17 on LR 17", ContiCrossContact UHP 255/60R18 on LR 18", Traxide/Optima Yellow Top, GME 3440 UHF, FrontRunner Roofrack.
Previously 1999 TD5 in Blenheim Silver
|
| 25th Aug 2008 1:03 pm |
|
|
MikeS2005
Member Since: 13 Sep 2008
Location: Midlothian
Posts: 920
  
|
Hi All
I am a parrot certified installer and what you are hearing is an amplifier pop your parrot kit should not be wired in this way you really need to get this changed as over time you will damage components inside your parrot kit . It should only be wired either from the leads previously mentiond especially since thr LR wiring is a most system
cheers
mike
|
| 5th Oct 2008 10:27 pm |
|
|
