Member Since: 16 Sep 2007
Location: UK
Posts: 6019
Parrot Kit Confused by other posts (UPDATED UNIT INSTALLED)
I have a Parrot 3200 bluetooth kit which I want to connect to the standard stereo in a TDV6 S, this is the Harmon Kardon speaker version with CD changer in.
Havign read lot's of post people seem to be using the Auto Leads sets, which are about £50+ and need some manual wiring still for switched +12V.
On the Parrot site (see link below), they offer a cable for the D3 which seems to be just plug and play and it takes care of power, radio muting etc etc. It costs £20.
Has anybody used this and why would you buy an autoleads one of this works without any mods and costs less than half the price.
Last edited by countrywide on 15th Jul 2008 3:57 pm. Edited 1 time in total
13th Jul 2008 8:40 am
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
Spoke to Parrot and they said to call www.vstore.co.uk and they would be able to supply the parts as they do all the Parrot after sales service etc. In then end I needed 2 cables, which is a direct plug and play including power source.
INKA-027-4480 - D3 Adapter £25.99
INKA-024-9934 - Parrot to Nokia Adapter £7.99
You can also get a Brondit bracket, but I didn't bother with it.
Installed the MIC and display today, so just need the cables tomorrow to finish the install.
14th Jul 2008 12:42 pm
ChemicalJasper
Member Since: 19 Jun 2008
Location: Lincolnshire
Posts: 48
Please do let us know how you get on, this is one of the mods I am consideringDon't worry..... it only seems Kinky the first time you do it!
15th Jul 2008 11:23 am
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
All installed now, cables seem a bit complex for what you actually need. I had to take the ignition switched source from the cigarette lighter but other than that it was plug and play. The interface box fitted down the side of the radio in a void and the mic is by the interior light. The display unit is mounted by the dash clocks and although it looks like it might be in the way, it is a great fit and the cables are easy to hide.
Click image to enlarge
Last edited by countrywide on 15th Jul 2008 4:00 pm. Edited 1 time in total
15th Jul 2008 3:45 pm
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4317
Nice install.....it looks very neat there
When I was installing my 3200LS I thought about sticking installing it there but I found that I couldn't see the screen properly due to the steering wheel (or was it the stalks?)...
How do you find it? Is it easy to see or do you have to move your head to see it clearly?
Cheers,
Paul2006 Discovery 3 TDV6 SE AutoBuckingham Blue 2007 Golf GT DSG
15th Jul 2008 3:59 pm
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4317
Ahh...I forget to mention that I also discarded this position because one day I'm hoping to get around to fitting some driving lights and the LR switch would need to go there.
Still....it's worth thinking about 2006 Discovery 3 TDV6 SE AutoBuckingham Blue 2007 Golf GT DSG
15th Jul 2008 4:03 pm
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
PaulP wrote:
Ahh...I forget to mention that I also discarded this position because one day I'm hoping to get around to fitting some driving lights and the LR switch would need to go there.
Still....it's worth thinking about
Ooops, didn't know the light switch went there.
I was worried about beig able to see the display but it seems fine.
The other option was the Brondit, but it seemed a big bracket for the little display.
15th Jul 2008 4:06 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Try Dashmount.co.uk, the disco3 mount is on there, smaller and recommended by Parrot for the 3100 & 3200. It fits via the hidded screws for the Stereo so NO screw holes needed in dash. Having mine fitted on Monday, on the lower part of the dash near stereo. I am having the cables taken through the panel near the power/cigar lighter.
Should be a nice install, will post pics when done.
17th Jul 2008 8:39 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Yo wiggs I assume this is the bracket for your install, thats where mine is going too as I think that bracket is nice n tidy. Where did you feed the cables for the Parrot, just asking cos I dont want to see too much cable, nor do I want holes drilled either.
18th Jul 2008 10:18 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Mine was for a phone holder.
I just ran the cable downwards and used a couple of those sticky back cable tie holders.
Then put the cable under the side of the center consul ..if that makes sence G4 Gone ...but not forgotten
18th Jul 2008 11:07 am
sbarnham
Member Since: 07 Nov 2007
Location: Blue Mountains
Posts: 103
countrywide wrote:
Spoke to Parrot and they said to call www.vstore.co.uk and they would be able to supply the parts as they do all the Parrot after sales service etc. In then end I needed 2 cables, which is a direct plug and play including power source.
INKA-027-4480 - D3 Adapter £25.99
INKA-024-9934 - Parrot to Nokia Adapter £7.99
.
Guys,
I had my Parrot 3200 installed in my D3 in Australia and they did not use any 'adaptor leads'. They wired the audio out of the Parrot to the drivers door speaker.
The problem I have is whenever the Parrot hands back to the stereo (unmutes) I get a really loud noise in the drivers speaker.
I am wondering if this is normal, or due to the way my has been installed ?
Anyone else have a LOUD noise on unmute ?
Thanks,
ScottNew MY15 TDv6 D4 in Buckingham Blue
Previously 2005 TDV6 HSE in Cairns Blue
- LR Steel Bar & Lights, Cooper STT 245/70R17 on LR 17", ContiCrossContact UHP 255/60R18 on LR 18", Traxide/Optima Yellow Top, GME 3440 UHF, FrontRunner Roofrack.
Previously 1999 TD5 in Blenheim Silver
27th Jul 2008 1:38 am
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
No noise on mine when it unmutes, it is pretty much a silent transition.
27th Jul 2008 8:30 am
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
mine is silent and cever as it mutes between the stereo and Satnav, I guess yours has been wired using the speaker as a independant. Nothing wrong with that, but it really is'nt using the capabilites of the Parrot System............tis like having a Disco and not using it offroad
27th Jul 2008 9:46 am
Reggieb
Member Since: 13 Sep 2007
Location: Watford, Herts.
Posts: 707
No problems with mine, transition is silent & radio comes back on without any issues TDV6 HSE - Light Guards - White Reflective Sticker
Club--Engel
Club--Satnav on the move (Thanks Pete)
Club--Kumho KL71 (265/70 17) they kick!
Club--Three Musketeers
Club--GNVP Sump Guard (The nuts)
Disco3Club
Never take life seriously. Nobody gets out alive anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
