Discochick
Member Since: 05 Feb 2011
Location: Co.Dublin
Posts: 4
  
|
| PDC Dealer can't seem to fix |
|
Hi, recently bought 06 TDV6 Auto. Rear sensors have never worked. LED and single beep on selecting reverse as you would expect but no further beeps as you back closer and closer to objects/walls. No fault tones. Brought it to dealer and they can't find the source of the problem after 3 hours of labour. No fault codes appearing when using diagnostic equipment. They checked sensors, took rear bumper off to check wiring, substituted a working control unit and checked the wiring between the rear bumper and the control unit and have found nothing, apparently. I'd suspect the sounder if it wasn't for the fact that it does give a single beep on selecting reverse. Dealer wants to book it in again for more investigation work but I'm reluctant to keep giving them cash for no good reason. Anyone got any theories? Thanks.
|
 12th Mar 2011 11:36 pm |
|
|
|
|
moose87
Member Since: 09 Nov 2010
Location: wooburn green
Posts: 11
|
does the led flash or constant? put your ear to each pdc sensor and listen for clicking, are they clicking?
if they've charged you 3 hours labour they should've found the fault though, they got to the ecu and the rear loom they could of carried out wiring checks and got to the problem
|
| 14th Mar 2011 9:49 pm |
|
|
