Member Since: 03 Mar 2018
Location: Dublin
Posts: 39
Question about corroded connector
Driver side beside acceleration pedal.
Anybody could say some info about this plug? Is it related to parking brake or suspension? Getting bong from epb. Tried to clean connector bit still getting bong but nothing on IIObd gap faults? Thanks.
9th Feb 2019 8:54 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4655
No fault codes? Are you checking all the control modules? What led you to that connector?
If you have a fault displaying on the dash then there has to be a DTC logged!yµ (idµ - eAµ) ψ=mψ
9th Feb 2019 9:26 pm
ontheair79
Member Since: 03 Mar 2018
Location: Dublin
Posts: 39
Keep getting this on dashboard "park brake off lift switch to apply" but epb is working fine. I still have another error C1A32-01 (2E) Front right corner valve - General failure information - general electrical failure
That's why I looking for electrical issues around my disco... Found voltage drop on one pin from front valve block but haven't got time to track this down....
9th Feb 2019 9:40 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4655
Keep the EPB switch up for about 6 seconds and see if it clears.yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
