EX2
Member Since: 24 Jan 2011
Location: Morecambe
Posts: 15
 
|
| Rear anti roll link arms? |
|
Hi, can anybody help me I was having a look under my d3 today and noticed one of the anti roll bar linkage arms ( I think that's what it is) is hanging free. Having inspected it looks like it has popped from the rubber bush and pin assemble. Does anybody know if this is the right name for it and were can I get a part number for it?
|
 9th Mar 2011 4:30 pm |
|
|
|
|
EX2
Member Since: 24 Jan 2011
Location: Morecambe
Posts: 15
|
Thanks now ordered I decided to do the pair and will be here tomorrow. Is there any thing I should be aware of whilst fitting. Was just going to put into off road hight and change them?
|
| 9th Mar 2011 4:54 pm |
|
|
maplecottage
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
 
|
Rear Stabiliser Bar Link (64.35.24)
Always support the vehicle on safety stands
Removal
1 . Raise and support the vehicle.
2 . Remove the wheel and tyre.
CAUTION : Use a wrench on the hexagon provided to prevent the ball joint rotating.
3. Remove the stabiliser bar link.
4. Remove and discard the 2 nuts.
Installation
1 . Install the stabiliser bar link. Tighten the new nuts to 115 Nm (85 lb.ft).
2 . Install the wheel and tyre. Tighten the wheel nuts to 140 Nm (103 lb.ft).
Simples 
|
| 9th Mar 2011 8:09 pm |
|
|
EX2
Member Since: 24 Jan 2011
Location: Morecambe
Posts: 15
|
Thanks for that I carnt see it being a problem 
|
| 9th Mar 2011 9:41 pm |
|
|
sizzle TdV8
Member Since: 22 Jun 2010
Location: Home of the white Stilleto
Posts: 22
|
How much for the link arms?
|
| 9th Mar 2011 10:01 pm |
|
|
EX2
Member Since: 24 Jan 2011
Location: Morecambe
Posts: 15
|
Six quid each plus vat
|
| 9th Mar 2011 10:59 pm |
|
|
The Transformer
Member Since: 22 Jan 2010
Location: Leicestershire
Posts: 1791
 
|
Is that price from Landrover?
|
| 9th Mar 2011 11:02 pm |
|
|
