GraemeS
Member Since: 17 Mar 2008
Location: NSW
Posts: 706
|
Can anyone advise the diameter of the rear ARB please? I've measured the one on my D4 at 22.3 mm (approx 7/8") just outside the RHS chassis mount and would like to know if its thicker/heavier than a D3 one. I'm not concerned about the possibility of different grades of steel having different characteristics.
I'm going to put a D3 front ARB on my D4 to reduce the degree of individual front wheels following road undulations and will replace the rear one too if its much lighter. I have already removed (but then refitted) the front one to be sure it can be done.
Thanks.
|
30th Jan 2010 5:03 am |
|
|