Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
I have fitted some of mine today ...not finished yet though .
Its working thats the main thing . Big thanks to Andy and Andrew for there part in my installation
Some random shots ...
I cant say i have been that impressed with the Logic 7 stereo in my car ..well i mean it dosent seem that much better than my old hi-line one in my previous D3...but the sound on the DVD is fantastic ..it needs to be heard to be believed ...
Going to put the picture in motion module back in so i can listen while moving aswell ..
Oh ..and for those who may have noticed ..the software on my screen is from a FFRR ( just in case it looked different than yours ) ..but thats a different project G4 Gone ...but not forgotten
21st Apr 2010 11:22 pm
Riccardo
Member Since: 20 Feb 2010
Location: Porto (was Kent)
Posts: 4123
Fantastic!!
It is frustrating not being able to do those things!
Anybody who would do that for me for a cost?
22nd Apr 2010 12:10 pm
ajsms999
Member Since: 28 Jul 2009
Location: shropshire
Posts: 206
Well done Adrian,
The software is different to mine - why?
Is it supposed to be better?
Thanks
Andrew
22nd Apr 2010 7:08 pm
Reneseren
Member Since: 04 Feb 2010
Location: DK
Posts: 34
Maaaaann.....
22nd Apr 2010 8:05 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
ajsms999 wrote:
Well done Adrian,
The software is different to mine - why?
Is it supposed to be better?
Thanks
Andrew
Yes and no ...somethings better ..some worse .
Im using the software to test something else and couldnt be bothered to switch it back to discovery software for the piccys .G4 Gone ...but not forgotten
22nd Apr 2010 8:10 pm
1andrewm
Member Since: 26 Feb 2010
Location: South Yorkshire
Posts: 42
Gents,
Another great post! spot on.
Kr
AndyMAndym Expert Beverage
23rd Apr 2010 9:31 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
A few pics of my install
This is what i didnt want to happen ...the RSE unit is touching my radio charger
I then had to move the charger over to clear the RSE unit
Fitted here now
G4 Gone ...but not forgotten
25th Apr 2010 3:42 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Can anybody with the RSE check a couple of things for me
1 , does the dvd player check the 6 disks every time you start the car
2 , does the dvd player not continue from the last place ..ie ..starts from the beggining
Seems daft as my £60 dvd player resumes from were it was last watched .G4 Gone ...but not forgotten
1st May 2010 9:52 am
ajsms999
Member Since: 28 Jul 2009
Location: shropshire
Posts: 206
Hi Adrian,
The player only 'checks' the discs when I have taken the magazine out.
The player starts from the previous point unless you press theb stop button twice. In which instance it starts again from the beginning.
Sounds like you havent got a 12v constant feed.
Hope that helps.
Thanks
Andrew
1st May 2010 10:07 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Could be the problem
I ran the wires down to pin 1 and pin 12 in the drivers footwell connector .
I may have them wrong at the dvd / rse unit end ...i will swap them roundG4 Gone ...but not forgotten
I'm with Andrew on this one, it has to be a wiring issue
Andy.2022MY Defender 110 D250 HSE X Dynamic, Gondwana with options!
2015 Range Rover 4.4 SDV8 Autobiography, Indus Silver, Black Pack
Gone:Disco 4 HSE Luxury, Firenze Red, Ebony/Ivory
Gone:2006 FFRR TD6 Autobiography, Black
Gone: 2013 Jaguar XKR Convertible, Italian Racing Red😢
Gone: 2008 Disco 3 HSE, Hybrid Tv + Retro-fit RSE System & DVD
Gone: 2010 FFRR TDV8 Vogue SE, RSE & DVD, Stornoway Grey
1st May 2010 8:58 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Yes...wires round the wrong way
They were both wrapped in spiral wrap with the same connectors on ..i just plugged them into the wrong unit .
All working as it should be now G4 Gone ...but not forgotten
2nd May 2010 12:03 pm
ajsms999
Member Since: 28 Jul 2009
Location: shropshire
Posts: 206
Thats great Adrian,
Brilliant isn't it
2nd May 2010 6:49 pm
SWR
Member Since: 07 Nov 2013
Location: Warwickshire
Posts: 840
Wow what a great thread.
It is something i have been contemplating.
Does anyone know a good place to start sourcing parts for this?
It looks excellent.
Thanks
Simon
1st Feb 2014 11:08 pm
Landyman37
Member Since: 21 Feb 2016
Location: West midlands
Posts: 22
I know this is a old thread I have looked at the wiring diagram the plug that comes out of ours has got 7 pins round plug (disco 4). Anyone know where this would go to?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
