Member Since: 07 Jul 2009
Location: gelderland
Posts: 216
Goed morning Barn1e, very nice, a question, what part is plastic trim lever, you order from advanced factors, I can’t not find.
Thank you 🙏
11th Mar 2019 3:11 pm
Barn1e D3 Decade
Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
I cannot see the tools I bought on their website https://www.advancedfactors.co.uk but if you search for “trim” you will find several options. They do make trim removal much easier.2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
13th Mar 2019 9:23 pm
Shutts
Member Since: 26 Nov 2011
Location: Tiptree
Posts: 146
Got our under the car yesterday afternoon and indeed there was a small amount of pipe above the nut. On close inspection I saw there were a couple of small marks on the side of the plastic pipe. I also checked the O rings in the connector and there was not damaged.
Cut the pipe down as far as I dare and refitted it. It was a better fit but there were still some foam like bubbles coming out so not a perfect seal. I left the car overnight in off road mode, with the fuse still in place. Checked it this morning and the car didn’t drop too much. Will reset the height later today, take measurements and pull the fuse just to check a bit more scientifically tomorrow.
However, I have purchased a complete new pipe as if I’m going to replace the pipe I didn’t want any joints. £32 for a genuine part off eBay, which I didn’t think was too bad. Also got a couple of new VOSS connectors just to be sure.
2005 D3 SE
1998 Disco 300tdi - slow play thing
1995 Defender 300tdi - Winching play thing
Aprilia RSV 1000 - fast play thing
Honda CR250 - noisy play thing
2005 D3 SE
1998 Disco 300tdi - slow play thing
1995 Defender 300tdi - Winching play thing
Aprilia RSV 1000 - fast play thing
Honda CR250 - noisy play thing
Member Since: 12 Dec 2019
Location: UTRECHT
Posts: 4
Noobie question
Hi all,
So as I have told you all in my introduction I am doing some maintenance work on my 2006 Disco 3.
I have managed to get brand new front lower control arms at a bargain (the fellow sold his Disco 3 but forgot to sell his pre-ordered control arms) and now I am also looking at a bargain for air struts!
However the air struts are for a Range Rover L322... Question is; will it fit/work on a Discovery 3?
I know that some parts of the Range Rover Sport are also usable on the Disco 3, ever since the chassis is alsmost the same, but I thought the RR L322 has a different chassis and quite possibly the struts won't fit. Nevertheless I thought it couldn't hurt to see if the infamous experts on this forum could tell me if it would fit.
Kind regards
LandyNL
7th Jan 2020 8:38 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13598
Hi
Alas the L322 are totally different from the D3
7th Jan 2020 8:49 pm
Adigorn
Member Since: 14 Mar 2010
Location: Birmingham
Posts: 546
Its a NO goThe Old rangies do not go mad, they mad go
7th Jan 2020 8:50 pm
LandyNL
Member Since: 12 Dec 2019
Location: UTRECHT
Posts: 4
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
