Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1072
  
|
| Retro fit memory function D4 |
|
I am almost certain I have seen a thread on this, but I cant find it 
Fitted HSE memory seat, and it works in bursts. So I think I need to fit a wire or something.
Anyone point me in the right direction please?
Thanks
|
 17th Nov 2018 5:17 pm |
|
|
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1072
|
The seat does have all the modules etc.
|
| 17th Nov 2018 5:57 pm |
|
|
|
|
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1072
|
Thanks Nick.
It maybe some time before i get the parts, but will report back when I do 
|
| 17th Nov 2018 6:30 pm |
|
|
stephenw46
Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1154
|
I fitted hse memory seat in my xs switches fitted in door changed files with idbt tool all working 👍🏻
|
| 17th Nov 2018 7:20 pm |
|
|
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1072
|
Ooooh.
So just to be clear, you just added the switches to the door panel and all was working?
Was the wiring already in the door?
|
| 17th Nov 2018 7:42 pm |
|
|
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1806
 
|
Stephen, I’ll see if I have time to trial this with HSE door switches and GS door loom tomorrow (and IID) and report back. I am homing in on HSE door loom for my Highline + logic 7 update 
Can you confirm CCF Updates needed?
Thanks
N. Stolen - D4 Loire Blue
D4 Bali Blue
|
| 17th Nov 2018 8:04 pm |
|
|
stephenw46
Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1154
|
With memory needs to be selected and then my drivers seat is 12way
|
| 17th Nov 2018 8:43 pm |
|
|
stephenw46
Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1154
|
I just removed original switch plugged in new memory seat switch and all was fine
|
| 17th Nov 2018 8:45 pm |
|
|
|
|
Gilly1
Member Since: 09 Sep 2015
Location: Somerset burnham on sea
Posts: 359
 
|
I also did the seat swap with memory pack for door and just plugged it all in and it works fine, but I did read when I was researching that some do work in quick bursts, passenger is plug and play and drivers (if I recall) needs to have 1 or maybe 2 wires switched around on the seat connector. Sorry I can’t pin point the post I read it from, 2015MY discovery 4 se tech with factory black pack.
With added
Rse, tv, electric memory seats, rear camera, heated steering wheel,
Headlight dip assist, remote FBH, led door light pack,easy lift kit,osram front fog/drl/active cornering lights. and whatever els I can find to do,
|
| 17th Nov 2018 9:41 pm |
|
|
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1072
|
Famousfive wrote:Stephen, I’ll see if I have time to trial this with HSE door switches and GS door loom tomorrow (and IID) and report back. I am homing in on HSE door loom for my Highline + logic 7 update
Can you confirm CCF Updates needed?
Thanks
N.
Did you get a chance to have a go at this Nick?
Cheers
|
| 19th Nov 2018 4:35 pm |
|
|
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1806
|
ran out of time Phil - I got the door card in with the memory module installed yesterday and then went to put the seat in with fading light and realised missing seat memory module which was somewhere in the house ... after then searching for an hour (and finding) I thought I'd be stupid to continue in the dark and had a glass of wine instead... so if weather is ok tomorrow lunchtime I might try again then ... and will post update when I do Stolen - D4 Loire Blue
D4 Bali Blue
|
| 19th Nov 2018 4:51 pm |
|
|
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1072
|
Thanks for the update
|
| 19th Nov 2018 7:00 pm |
|
|
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1806
|
Phil,
still not round to doing this yet .. .hopefully at the weekend
Have you seen this thread https://disco4.com/forum/discovery-3-cloth...68891.html
I'm expecting (but hoping not) for mine to work in bursts until I get an updated door loom in place that might send the right signal back to the memory module that all is good. If that fails then I think i'll look again at the wiring and if that fails have to do back to the splice mod above - but really want the memory function
Nick Stolen - D4 Loire Blue
D4 Bali Blue
|
| 22nd Nov 2018 2:17 pm |
|
|
