Member Since: 01 Oct 2008
Location: in the middle
Posts: 540
Thank you Robbie, I might have to make a purchase. Is there anywhere that is good to buy, or is evil bay as good as any?
Cheers Lee
18th Nov 2016 7:59 pm
iroman
Member Since: 17 Jan 2014
Location: Česká republika
Posts: 1
Installation wiring info /manual
Hi robbie,
i bought same unit for my LR4, but i am much more IT gu than technical, can you send me more infor about wiring?
many thanks Roman
25th Dec 2016 11:20 am
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 529
Does the TC4 just plug in on a D4 or do you have to wire it in like you would on a D3?
Pete.IID, webasto software and workshop facility's available.
23rd Feb 2017 3:42 pm
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 529
Just to expand on my question, will the TC4 plug into the loom in the boot without mods or do you have to fit it like you would in a D3? Im guessing as Robbie hasn't just plugged it in, it's not that simple.
Pete.IID, webasto software and workshop facility's available.
28th Feb 2017 9:11 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17682
It can either replace or augment the normal remote unit located in the boot. The unit comes complete with suitable leads.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 529
Ok brilliant. Was not wanting the normal remote, we know there is a good signal where it's parked and never know when it's being used so the timer isn't much use, but being able to text 20 mins in advance is a good option.
Are the leads already fitted with the plug for the vehicle as well or is that something that I would have to do? Are the leads correct on the normal TC4 as well as the advance? Any what exactly is the difference between the TC4 and TC4 advance?
Sorry for all the questions, I've read and read about it but it's not really clear to me yet.
Many thanks.
Pete.IID, webasto software and workshop facility's available.
28th Feb 2017 10:02 pm
holm.dk
Member Since: 10 Mar 2013
Location: Esbjerg
Posts: 69
Great post!
Do you have any info on installing the module in the boot?
Am I right that you can just change the module in the boot from the standard unit to the TC4 using the existing loom?
Or keep both the standard unit and the TC4 with the Webasto Y-splitter cable?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
