Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
I think the cable ties are a good idea maybe fit even more in a cris cross pattern secured with hot melt glue. They are flexible enough but will tie the filler into the structure of the A barAndrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
16th May 2022 7:40 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13612
Many thks and indeed good call using some more in the cross cross pattern , hopefully will work better as every filler I previously used just fell out
Appreciate the feedback
16th May 2022 6:29 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13612
So I used the hot glue gun to secure the cable ties, then threaded it through the foam , found some washers but there metal so will find some plastic ones so there’s no risk of dissimilar reactions from the filler
Need to shape the foam so it’s fits alot better , can then use some more cable ties on the ends so it secures the foam , just wished to share in case this may be useful to others in the future , really hope this filler will work
wondering if it will be best to mix up little bit at a time so I can then gauge how quickly it goes off
Did try and add some more cable ties but very difficult drilling into the A bar foam as it wanders very easily
As always many thks as the help has been invaluable
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum