Member Since: 13 Sep 2008
Location: Midlothian
Posts: 920
Spotlight mounting and spotlight xenon upgrade
Hi all
I have mounted my OE LR spotlights without drilling my bumper and upgraded the LR spotlamps to xenon so for those of you that are interested here are the pictures
[
What do you think I an considering getting HID bulbs to match orginal headlights but not sure yet
cheers
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
28th Nov 2009 10:54 pm
D3Norway
Member Since: 15 Sep 2009
Location: T
Posts: 96
For the best light output you are best off using 6000K give you the brightest light witout turning blue. 50watt's really the one to go for! christian@betekconsult.com
29th Nov 2009 9:45 pm
disco kitch
Member Since: 08 Apr 2010
Location: Norfolk
Posts: 26
do you find they wobble? without being mounted to the bumper?Oh why does land rover ownership have to be such an "adventure"
14th May 2010 12:00 pm
disco_doozle
Member Since: 03 Nov 2007
Location: Bree
Posts: 447
pictures of your brackets please....and how you fixed them on the car behind the grill....
Was planning to do the same....
I have an idea but the more input the better.....perhaps your idea is better
It looks similar to the way I have fitted my front lights but I don't have any pictures in my gallery.
I have bolted on a right-angled bracket, that is used for fencing, onto the metal part of the car behind the grill. Then bolted on a flat metal plate to the bracket which pokes through the grill. Lights are then bolted to that.
The metal brackets/plates are the one used for joining fencing supports etc, cost a couple of euro each and are available from any DIY store.The next American ex-pat that calls it a "truck" is going to find out what 2.7 tons feels like on their foot...
Club "yes, I too have had the EGR's replaced..."
Club "yes, I too have had the compressor replaced..."
Club "yes, I too once had the car at the dealer for a couple of weeksnearly 4 weeksover 4 weeks...5 weeks"
Club "yes, I too have had EPB failure..."
Club "yes, I too get mysterious bings and bongs..."
14th May 2010 12:32 pm
MikeS2005
Member Since: 13 Sep 2008
Location: Midlothian
Posts: 920
Hi
As long as you use an aluminium bar about 2 inches in width and at least 10mm thick you will have no wobble issues.I also put a rubber backing onto the ali bar so it wouldnt mark the paint.
If you use screw bolts and drill into the front crash bar the light brackets will be solid
cheers
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
[
, Performance BB6 17" + Duratracs 256/70R17, RLD Skid-plate, Traxide second battery setup, Lightguards, BAS EGR's blank kit, BAS Silicone hose, Black bonnet decal, 
