Member Since: 22 Mar 2020
Location: norwich
Posts: 230
suspension fault
my air suspension is playing up the amber light is on any ideas ? . this is what the gap iid shows up .
2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
300tdi defender 90 in bits needs lots of work
19th Oct 2021 6:45 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4626
Poor connections/wiring on the reservoir valve, or valve needs replacement.
yµ (idµ - eAµ) ψ=mψ
19th Oct 2021 7:20 pm
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 230
new valve fitted and now seems to bee working ok2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
300tdi defender 90 in bits needs lots of work
23rd Oct 2021 1:08 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4626
If only it was as easy as that all the time. yµ (idµ - eAµ) ψ=mψ
23rd Oct 2021 1:40 pm
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 762
^^^^^^^^^^^^^^^^ yes if only,ive had the res valve code for 2 years now fitted cheap Chinese valve then genuine valve had all the wiring apart lots of times and still have the amber light,mind you its all works and has been through 2 mot,s now just a bit slow going up as the reservoir has no air in it to speed thing upplease excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
23rd Oct 2021 4:26 pm
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 230
its a cheap chicrap valve from ebay that i fitted .2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
300tdi defender 90 in bits needs lots of work
23rd Oct 2021 5:14 pm
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 230
now showing fault code c1a20-64 pressure increases too slow when filling reservoir . i have just ordered a new compressor2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
300tdi defender 90 in bits needs lots of work
26th Oct 2021 4:13 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4626
Desiccant saturated/degraded and blocked filters.yµ (idµ - eAµ) ψ=mψ
26th Oct 2021 4:32 pm
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 230
changed the compressor and its still showing pressure increase too slow when filling reservoir . this fault was not there before changing the valve . could the cheap china valve be not as good as it should be ? .2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
300tdi defender 90 in bits needs lots of work
4th Dec 2021 10:58 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1780
Just had the same problem. Removed the valve and took it apart, cleaned it up with brake cleaner then blew it out with air. In mine the plunger was stuck and not moving. This turned out to be the small "O" ring in the plunger body. Once replaced the plunger worked fine so reassembled it putting new "O" rings all round. Now seems to be working okay, will need to wait and see if the problem comes back.
I would refurbish the old one and put it back in.
11th Dec 2021 2:48 am
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 230
everything seems to be working ok . its only used for road use its just the amber light is on . is this a mot fail ? not due till march so i will then fit a genuine valve .2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum