Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Maintenance & Mods (D3)

Suspension fault C1A20-64 - how to fix
Post Reply  Down to end
Page 3 of 6 <123456>
Ollram
 


Member Since: 04 Dec 2006
Location: Gortynia
Posts: 568

Greece 2006 Discovery 3 TDV6 Base 7 Seat Auto Bonatti GreyDiscovery 3

Hi

Had the same fault msg.

While the compressor was on the car, it is really noisy when it operates.... Engine off and compressor off (not in operation i pressume since i dont hear i) i put soapy water on the dryer cover at the two pipings area - the blue and orange - and i definetely see there is a leak. Is it normal???? Compressor was not in operation...
I did the same test when compressor operates (noisy again) but i caanot be sure whether there's a leak...
Do i have the same problem??
Cheers
  
Post #137772222nd Nov 2014 1:11 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
gruodiz
Site Supporter 


Member Since: 16 Nov 2011
Location: Klaipeda
Posts: 281

Lithuania 2006 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Ollram, you do have this problem if yellow light comes in instrument cluster and is written NORMAL HEIGHT ONLY, height change switch LEDs off. Even you spotted leakage in blue and orange connectors area, try to look a bit closer and you will see the crack which becomes bigger then air system pressure is higher.

I was quite time ago when I first time created the cover and during that time I have changed about 20 of them with happy customers after cheap fix compared to compressor change. Actually my last covers are modified at least for 3th time, cheaper and lighter material which is very similar to dryer cover (polyurethane or so), air connectors are different from the first time as well. But still there was one customer who wanted no to change the cover but all dryer because of his belief in engineers. I tried to order dryer at dealers but got the answer that they are no longer available for sale.

If that is true and dryers are no longer available I can have a bulk order to manufacture these covers at professionals. How many of you guys would like to have this complete kit including cover, pipes and connectors?

If there're more interesants I'll make a write up how to DIY this fixwith pictures Thumbs Up
  
Post #137772822nd Nov 2014 1:38 pm
View user's profile Send private message View poster's gallery Reply with quote
Flapjack
 


Member Since: 10 Aug 2013
Location: Livingston
Posts: 551

Scotland 2006 Discovery 3 TDV6 HSE Auto Fuji WhiteDiscovery 3

I'm interested in price etc and a write up Thumbs Up
 blessed are the losers ,for they determine the winners  
Post #138924913th Dec 2014 10:35 pm
View user's profile Send private message View poster's gallery Reply with quote
LX0850
 


Member Since: 28 Apr 2010
Location: Luxembourg
Posts: 51

Luxembourg Ensign 2005 Discovery 3 TDV6 HSE Auto Zermatt SilverDiscovery 3

It looks like I have the same problem.

In one of the answers to this search :
- http://disco3.co.uk/forum/search.php?searc...leaking%22
I found a link to a seller on ebay - landyair_original :
- http://www.ebay.co.uk/usr/landyair_original

They have a replacement dryer cover :
- http://www.ebay.co.uk/itm/Land-Rover-Air-S...1c4c4e9214

It the description on ebay they remind you that the filter granules also get old:
"Worn air dryer cover and the components inside the air dryer! filters and deteriorated filtration granules unit can affect air output quite significantly"
So it might be better to get the whole kit :
- http://www.ebay.co.uk/itm/Land-Rover-Air-S...19f958866a

Does anyone have experience with this/these kits and landyair?

-Graham-
  
Post #140822315th Jan 2015 3:34 pm
View user's profile Send private message View poster's gallery Reply with quote
gruodiz
Site Supporter 


Member Since: 16 Nov 2011
Location: Klaipeda
Posts: 281

Lithuania 2006 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

For all you guys who waited for one of these cap from me. Update and more pictures in first post of this topic.

Click image to enlarge
  
Post #140907116th Jan 2015 10:05 pm
View user's profile Send private message View poster's gallery Reply with quote
papiti
 


Member Since: 20 Jan 2015
Location: Puerto Rico
Posts: 2

United States 2007 LR3 4.0 V6 Petrol SE Auto Unknown ColourLR3

Hello, I am interested in this part, can you PM me with price for the item shipped to US.

Thanks!! Very Happy
  
Post #141115620th Jan 2015 3:42 pm
View user's profile Send private message View poster's gallery Reply with quote
papiti
 


Member Since: 20 Jan 2015
Location: Puerto Rico
Posts: 2

United States 2007 LR3 4.0 V6 Petrol SE Auto Unknown ColourLR3

gruodiz wrote:
For all you guys who waited for one of these cap from me. Update and more pictures in first post of this topic.


OK, thanks for the PM and reply, since I cannot PM you yet, and answering your PM, I have to do the "Bubbles Test" for the cap leak tonight, so, I will let you know either tonight or tomorrow if I do need the part and do what is necessary to do the transaction you.

Thanks
  
Post #141130920th Jan 2015 7:35 pm
View user's profile Send private message View poster's gallery Reply with quote
gruodiz
Site Supporter 


Member Since: 16 Nov 2011
Location: Klaipeda
Posts: 281

Lithuania 2006 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Wish you luck to find the crack, otherwise it might be compressor fault.
  
Post #141131520th Jan 2015 7:38 pm
View user's profile Send private message View poster's gallery Reply with quote
antonius
 


Member Since: 07 Nov 2009
Location: Delft
Posts: 3

Netherlands 2006 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Hello, I am also interested in this part. I have the air-leaking-problem since mid 2014.
I cannot PM you, so can you please PM me.

Thanks!!
  
Post #143103922nd Feb 2015 3:17 pm
View user's profile Send private message View poster's gallery Reply with quote
access
 


Member Since: 06 Jan 2005
Location: Naxxar
Posts: 159

Malta 2011 Discovery 4 3.0 TDV6 XS Auto Izmir BlueDiscovery 4

I think I need one of these, how can I find out which type of compressor I have in my D4 2011 model?
  
Post #14978166th Jul 2015 3:08 pm
View user's profile Send private message View poster's gallery Reply with quote
gruodiz
Site Supporter 


Member Since: 16 Nov 2011
Location: Klaipeda
Posts: 281

Lithuania 2006 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Remove your compressors bottom cover and you will see which type is it. According to your build year it should be HITACHI.

Or take a picture of compressors lower plastic cover upload here or send it to me by email (email address in first post) and I will let you know. These covers are different shape for HITACHI and AMK compressors.
  
Post #14978266th Jul 2015 3:24 pm
View user's profile Send private message View poster's gallery Reply with quote
Stay Frosty
 


Member Since: 25 Jan 2010
Location: Merseyside
Posts: 82

United Kingdom 2006 Discovery 3 TDV6 SE Manual Stornoway GreyDiscovery 3

Gruodiz that is amazing work. I'm very impressed.

I have the same bubbles. They appear to be coming from the blue pipe inlet.

I have tried the overhaul kit prior to discovering the leak but was unable to get the air dryer apart due to badly corroded torx bolts! I did manage to do the rest of the overhaul, but had to butcher the clamp! It was a rather embarrassing McGyver fix including the use of a 4 inch Roundhead nail and a zip tie Embarassed I was in a hurry though and it was late!

The rear of the car seems to lift normally, but the front is very slow. Would this symptom point towards this leak? I am resigned to the fact that I need a new compressor, but am I possible going to have more issues after its replacement. I am driving to Italy in 9 days and only have 2 days off between now and then!
  
Post #15115415th Aug 2015 10:24 am
View user's profile Send private message View poster's gallery Reply with quote
Charles
 


Member Since: 09 Jun 2009
Location: Luxembourg/Dudelange
Posts: 85

Luxembourg 2009 Discovery 3 TDV6 SE Auto Stornoway GreyDiscovery 3

Hi
Had the same fault last week
After clearing the fault all went well again.
Will check the pipes.
But just to know if they are leaking
Do you still have the replacement kit?

Best Regards

Charles
  
Post #151985925th Aug 2015 9:49 am
View user's profile Send private message View poster's gallery Reply with quote
Diver Dave
 


Member Since: 25 Sep 2015
Location: cumbria
Posts: 2

United Kingdom 2007 Discovery 3 TDV6 HSE Manual Siberian SilverDiscovery 3

i had the same problem , thanks to everyone on here i checked it and yes there was a crack... i just did the two part liquid steel option and it worked a treat......thanks guys... Mr. Green
  
Post #153521326th Sep 2015 6:01 am
View user's profile Send private message View poster's gallery Reply with quote
gruodiz
Site Supporter 


Member Since: 16 Nov 2011
Location: Klaipeda
Posts: 281

Lithuania 2006 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

To let everybody know that cap is now available in stock again Thumbs Up

Click image to enlarge


Click image to enlarge
  
Post #153521726th Sep 2015 6:20 am
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 3 of 6 <123456>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2018 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site