G-Stone
Member Since: 22 Aug 2009
Location: Johannesburg
Posts: 2
|
Hi
Anyone got any ideas what could cause this:
Drove my Disco 3 to work yesterday morning, no problems. When I tried to leave @ about 13h00 as soon as I put the ignition on I get
Hazards flashing - can not turn them off
E on the display where the gears are shown in manual mode.
On the main display I get Transmission Fault Limited Gears Available, Transmission Fault Reduced Traction, Engine Systems Fault, Park Brake Fault, Program Fault No Mode Selected.
Aircon fan, radio, lights etc still working fine.
Could not start the car.
Tried ignition off & start again several times over about 1/2 hour
So I call LR Roadside Assist. They say they will send someone to help.
3 hours later I am still waiting, so I go try again.
This time I get:
Hazards flashing
F (instead of E) on the display where the gears are shown in manual mode.
On the main display I get several errors but different ones from before
But this time the car starts.
Turn ignition off & try again
No errors. Drive home with no problems & worked fine all day today.
All the errors except Engine Systems Fault seem to be related to controls on the console. So I am thinking a communications problem between the console & the rest of the car. Could be heat related, once the temperature dropped a bit it came right again. But today was just as hot & no problems.
It is due for it's final maint plan service in Jan so I could try book it in now for that & get them to check it, but if anyone knows what could cause it, then at least I have something to tell them to check.
Thanks
|
19th Dec 2009 7:59 am |
|
|