Member Since: 09 Jun 2012
Location: Ayrshire
Posts: 3
11 Plate Disco Shakes on Start Up
I would be interested to hear any views on the problem I'm having with my 11 plate Disco 4 which has 37k on the clock.
Recently I've noticed that when I turn it on in the morning the engine (or something under the bonnet) seems to "noticeably shake" the car for a couple of seconds before running normally. It never used to do this and I'm not aware that its burning any oil or under performing in any other way.
Its only started doing this recently and im a bit concerned that perhaps there is an engine mounting issue or perhaps it indicates something not quite right in the engine?
Warranty is up at the end of this month so feeling a bit vulnerable.....
Thoughts and advice appreciate.
Cheers
Stuart
15th Feb 2014 5:07 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Glow plugs can make it do that; does it do it when the engine is warm?Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 09 Jun 2012
Location: Ayrshire
Posts: 3
Cant say I've noticed but will take note of this tomorrow when I'm out in it and report back. Thanks
15th Feb 2014 5:19 pm
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3653
Mine does this, but only when its really cold - feels like its shivering
15th Feb 2014 5:21 pm
hotrocks
Member Since: 05 Jan 2010
Location: England
Posts: 467
Mine does this when its really cold, its the Fuel Burning Heater kicking in...
15th Feb 2014 5:25 pm
MarsKy
Member Since: 23 Dec 2011
Location: Lanarkshire
Posts: 847
Me too. Rattles the dog cage to make it seem worse than it is.
Anyway, just had LRA out this hour - parking sensor knackered. Again. Booked in. Warranty runs out mid-April. Need to think about my options.
15th Feb 2014 5:46 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Well if it is the glow plugs the favourite reasons includes a failing ECT sensor making the engine thing it is warmer than it is.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26767
When I was at Land Rover Experience the other week, the instructor said that you should press the start/stop button first without your foot on the brake, wait for the system check and glow plug light to go out, then put your foot on the brake, and press the start/stop button again.
His theory was that this allowed the glow plugs to work properly before the starter takes all the current.
Not sure if it actually hides a problem, but mine starts smoother on cold mornings when I adopt this method. Mine is quite new (11 mnths) so unlikely I have a glow plug problem, but its never very smooth for the first few seconds unless I do as described.
15th Feb 2014 7:26 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
But the system is designed to pause for the glow plugs before spinning the starter?
Mine seems ok.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 24 Oct 2012
Location: Huddersfield
Posts: 46
My 11 plate seems to do this too and I can't recall that it used to. I'd be interested in finding out what the cure is as it runs out of warranty in June.
Regarding pressing the button first, I thought the start procedure automatically waited fit the plugs to heat.
28th Feb 2014 5:51 pm
UnSean
Member Since: 31 Jan 2014
Location: Notts
Posts: 19
My 62 plate feels like only 3 cylinders are running on cold startup.2012 D4
28th Feb 2014 8:07 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50977
Mine makes a little shake when cold... like it has an engine in it or something 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
28th Feb 2014 8:17 pm
mike23118
Member Since: 01 Oct 2010
Location: North Wales
Posts: 1028
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum