- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
- If you have a DISCO3.CO.UK account you do not need to re-register, just Log In as normal
disco_steve
Member Since: 25 Aug 2009
Location: Are you sure this is the M5 ?
Posts: 872
  
|
Having had a 'noise' from my compressor for a while, and after reading these posts, I decided to see if mine was also clogged with silt etc 
After removing the bottom cover (thanks to DG for the info making this easy) I was confronted with the obvious source of the noisey compressor, the alloy support bracket is fractured (see picture) I have no idea of how this happened, certainly not by me off roading, maybe the previous owner (who said it had never ventured on to grass let alone anything worse) was the culprit 
The question is:-
How do you remove the whole compressor so gain access to the bracket, the bottom bolt(s) are easily accessable, but the top ones seem impossible to get to, let alone undo !!
Will it be repairable (TIG welding  )
Also of some concern, and worth bring to the attention of the other forum members is the level of corrosion on the bracket itself, I can only assume this is from road salt  considering the location of the bracket you would have thought LR would have considered this during the design and used corrosion resistant components - obviously NOT 
Will I be able to buy/aquire only the bracket, and swop over my existing unit, or will it be a lorry load of gold delivered to my LR stealer (oops Dealer) to pay for a complete new compressor (and bracket) 
Any help as always greatfully appreciated 
 Never get mad - get even !!
previous vehicles:
04 D2 TD5 - (clocked 189k from new)
52 X-Trail 2.2 SVE
various euro boxes !
|
 Sat Nov 21 2009 5:54pm |
|
|
manticore
Member Since: 14 Oct 2009
Location: essex
Posts: 16
 
|
TFC changed the bracket on mine last week,I think it took about 1 hour.
The bracket is available seperately and costs about £70.00
Normally caused by a jack being positioned under the compressor cover when changing a wheel I am reliably informed
Mark
|
| Sat Nov 21 2009 6:18pm |
|
|
disco_steve
Member Since: 25 Aug 2009
Location: Are you sure this is the M5 ?
Posts: 872
|
Unnecessary quote removed
Cheers Mark for the info - at least I now know I can get a replacement bracket and haven't got to cough up for a whole new unit (SWMBO would have a tizzy fit at spending that amount of £'s juust before crimbo )
Does anyone now how to get the compressor unbolted- I still can't see how you get to the top bolt(s) or even get the top plastic cover off/out ??
Maybe I'm being stoopid 
Anyone got any nice pics of removal 'by numbers'  Never get mad - get even !!
previous vehicles:
04 D2 TD5 - (clocked 189k from new)
52 X-Trail 2.2 SVE
various euro boxes !
|
| Mon Nov 23 2009 12:02am |
|
|
manticore
Member Since: 14 Oct 2009
Location: essex
Posts: 16
|
Give TFC a ring !!!
|
| Mon Nov 23 2009 8:18am |
|
|
Phil1644
Member Since: 14 Nov 2009
Location: Probably still in work!
Posts: 303
|
Took the plastic cover off mine today. The bolt on the underside sheared as soon as I showed it the socket set, possibly due to some chemical reaction between the bolt and the aluminium bracket? The other 2 were seized but the usual spraying with WD40 did the trick eventually. Once I had the plastic cover off I was pleasantly surprised, no mud or anything inside (perhaps the one previous lady owner story the dealer told me was true?), but the bracket was badly oxidised. I laced the whole lot with WD40 and then greased the two remaining bolts before reassembling it. Did I read somewhere there is a filter that needs cleaning associated with the compressor? I couldn't see anything obvious.
|
| Sat Jan 16 2010 7:07pm |
|
|
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 9691
 
|
there is an air compressor filter but it is situated inside the boot on the LHS - So unless you boot is constantly full of dust I wouldnt worry too much about it. Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
D3 HSE 2006, Locking Rear Diff, 4 x LF140s, 4 x Bosch Roof Lights, Frontrunner rack, RLD Rock sliders, Winch, RAI, Twisted Exhaust, Cooper STs, GSM FBH, Painted in a proper colour !, limo Tint SupaGlass
D4 HSE 2010, RAI, Winch, Locking Rear Diff, Remote Park Heater, Hybrid TV, Heated Steering Wheel, Adaptive Lights, Limo Tints
Last edited by DiscoDunc on Sun Jan 17 2010 8:11am. Edited 1 time in total
|
| Sat Jan 16 2010 9:32pm |
|
|
caverD3
Member Since: 02 Jul 2006
Location: Sydney
Posts: 5165
|
And there is a dryer full of desicant attached to the compressor. "A society that will trade a little liberty for a little order will lose both- and deserve neither"
Thomas Jefferson.
TDV6: Adaptive Headlights, Electronic Rear Diff, ARB Bar, Blaupunkt Speakers, JVC Powered Subwoofer, Removable Snorkel, Mitchell Bros Tow Hitch, Pioneer After Market Head Unit, Zenarc Touch Screen, In Car Sub-notebook, GPS Anntenna, Steering Wheel Control Adaptor, Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
| Sat Jan 16 2010 9:54pm |
|
|
dufftowndisco3
Member Since: 29 Sep 2008
Location: dufftown
Posts: 144
 
|
i had compressor replaced this week due to a ride height fault, which is still apparent, at 1st start up.
when the dealer took the comp' out it was covered in  , but still worked, the bracket mounts sheared too, that cost £50 on top of the compressor..... i'm gonna keep spraying some wax oil on the mounts every 6 months, as 50 sheets for a bit of alloy that rots with a bit of salt is extorsion 
top thread peeps 
Club MTR, black RRS wheels, RAI, GN sump guard, etc blah
D3, D1, DEF 90, FREELANDER COMMERCIAL
|
| Sat Feb 06 2010 4:18pm |
|
|
Nyambayar
Member Since: 19 Jul 2010
Location: Mongolia Ulaanbaatar
Posts: 2
 
|
Thanks to DG Took the plastic cover today without any problem. No mud or anything inside. How to resolve compressor noise? It will be noisy after car start up and then after few minutes no noise
|
| Tue Aug 10 2010 11:02am |
|
|
ruggedpeak
Member Since: 10 Jun 2010
Location: UK
Posts: 831
|
Silly question but Nick is on hols for 2 weeks:
Is the casing available as a spare part? I've bust mine at Tong Tony
Club RLD Wheel Protector & Sump Guard
Club 4x4 Info activated
Club TFC Servicing
Club GSM Remote FBH - probably the best modification in the world ever.....
|
| Sun Mar 20 2011 6:27pm |
|
|
dazsear
Member Since: 25 Jan 2011
Location: Nottinghamshire
Posts: 215
|
The top bolt is a bit of a nightmare to get to but with flexi extensions on the socket set it can be done.
Oh and the bracket welds quite easily if you have access to a Tig welder.
Daz 09/58 D3 HSE in Black
08 RRS TDV8 HST - now gone!
|
| Sun Mar 20 2011 8:28pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
