| Home · FAQ · New Posts · Private Messages · Search · Members · Members Map · Calendar · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
- If you have a DISCO3.CO.UK account you do not need to re-register, just Log In as normal
Simon.pl
Member Since: 02 Dec 2010
Location: Warsaw
Posts: 41


|
Actually I've seen, but unfortunatelly after posting this one
Thanks
|
Sun Jan 30 2011 10:04pm |
|
|
mike23118
Member Since: 01 Oct 2010
Location: North Wales
Posts: 329


|
Just a quick ? for the authors, Would it be possible to modify the landrover button on the key fob to activate the FBH through the 1533 timer
Hope its not been asked before
Thanks in advance
Mike
PS come on wiggs you know you can do it IF YOU GET YOUR D3 STUCK TRY ONE OF THESE
|
Sun Jul 17 2011 11:47pm |
|
|
wiggs
Site Sponsor
Member Since: 03 Sep 2006
Location: Sunny Norway this week
Posts: 9075


|
No
Looked into it a few years back ...it wasent worth persuing . G4 Gone ...but not forgotten
*New D4 Bluetooth modules ...Pm me for details*
*New Engine ECU 's .. 3.0L ...Pm me for details*
*Timed climate remotes ...Pm me for details *
*Digital TV tuners ....PM me for details
FAULTMATE MSV2 - D3 & D4 MULTI LICENCE
4X4 info screen enabled / off road sat nav unlocking / bluetooth upgrades , D4 timed climate and more ..contact me for more info
|
Mon Jul 18 2011 11:01am |
|
|
mike23118
Member Since: 01 Oct 2010
Location: North Wales
Posts: 329


|
just a thought, Shame IF YOU GET YOUR D3 STUCK TRY ONE OF THESE
|
Mon Jul 18 2011 5:09pm |
|
|
Splitpin
Member Since: 30 Dec 2010
Location: Worcester
Posts: 297

|
It could be quite simple to do, using an input to say when the alarm is set and then a flash of the headlamps via the button would do it and another flash to switch it off. D3 for daily driver, towing, mud and snow
380bhp mini cooper S for speed
Rover John Cooper LE MINI for the restoration "project"
|
Mon Jul 18 2011 6:34pm |
|
|
StevieJ4558
Member Since: 04 Aug 2011
Location: Edinburgh
Posts: 72


|
HI Wiggs
I met up with you at the LRO and you did some great work on my Disco, Many thanks
I am looking at fitting a FBH control for the winter? can I bug u and ask what you think of this unit ?
http://www.opengate4you.co.uk/page4.html
I think it will work just wondering what you think?
Many Thanks
Stevie
|
Sun Oct 09 2011 4:25pm |
|
|
wiggs
Site Sponsor
Member Since: 03 Sep 2006
Location: Sunny Norway this week
Posts: 9075


|
Not sure ... You only need a second or so connection ... That says min of 1minute
Also that is only text ... Not phone activation ( unless that's what u want )
You still need the oval timer to give you the "W" bus signal G4 Gone ...but not forgotten
*New D4 Bluetooth modules ...Pm me for details*
*New Engine ECU 's .. 3.0L ...Pm me for details*
*Timed climate remotes ...Pm me for details *
*Digital TV tuners ....PM me for details
FAULTMATE MSV2 - D3 & D4 MULTI LICENCE
4X4 info screen enabled / off road sat nav unlocking / bluetooth upgrades , D4 timed climate and more ..contact me for more info
|
Mon Oct 10 2011 12:24pm |
|
|
hensoni
Member Since: 01 Oct 2007
Location: Sleepy Somerset
Posts: 534


|
Stevie,
I used this one:
http://www.quantek.co.uk/GSM%20Remote%20Control.html
It has a good temperature operating range and the IP protection is good. The Webasto oval timer fill fit inside the box - but the spacers and fixing screws need shortening to prevent crushing. The IP55 grommets unscrew and can be replaced with rubber blind types. Mine is slotted in the spare battery bay between the ABS unit and the (disconnected) alarm sounder. Due to the antenna's proximity to vehicle metalwork, it is a little deaf but works fine.
Like most of these things, you need to read the back of the instruction manual before the front pages to turn off the voicemail on your SIM card.
TIP: on the underside of battery box lid, write the important details such as the password and the date that you last asked it for a status (thereby keeping the account open with the telecon provider) Club ATR
Club Wintrac 4 Xtreme
Club – “it looks like a scrapyard out there” - getting tidier!
Club Dixon Bate - it nearly fits
|
Mon Oct 10 2011 3:23pm |
|
|
sln8458
Member Since: 14 Nov 2011
Location: Norwich
Posts: 1

|
Hi Wiggs
I would have sent a pm but as a newbe I'm not allowed yet, I'm fine with that.
I was searching the net for info on installing a FBH and came across this thread of yours and in there I found
and I thought "I would love that on my phone"
I don't have a Disco but I do have a 75 which is still a ROVER after all
on the pretext that if I don't ask you don't have the chance to say yes, a bit cheeky I know, but..
is that app available to others??
SteveN
|
Mon Nov 14 2011 6:37pm |
|
|
discoBizz
Member Since: 20 Sep 2008
Location: Here...
Posts: 1284


|
It's not an app
It's a shortcut to the number assigned to the dialer which is connected to the FBH as described above, and though I'm sure wiggs will come along to elaborate on his method, you can achieve the same result by apps such as "TapToCall" (though haven't used it since the 3GS - switched to Android personally )
The icon you have to make yourself and assign it to the dialer's number as a "contact picture"...
Hope this helps ==> Guide - Inexpensive AV Modification
==> Guide - Extend the multimedia of your Discovery III (September 2011, v1.2 uploaded)
|
Mon Nov 14 2011 6:50pm |
|
|
fahrvergnugen
Member Since: 11 Dec 2011
Location: Goirle
Posts: 1

|
Hi,
I am new over here, but I found this while I was looking for an answer on the following subject. Hope that someone can help me out.
Yesterday my Thermotop V is programmed and it works verry nice. only the T91 does not work.
I have 12V on pin 1, earth on pin 6 and W-bus on pin 2. When I check the wiring pin 3 has 12V for a short time after pressing the "on" button, all the other wires have no response. When I disconnect the W-bus (pin2) there is no response on the T91 side and +/- 5V on the heater side.
Can someone please tell me whats normal, and what to do or check. I don't know anymore.
BR, Paul.
|
Sun Dec 11 2011 3:25pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|
|