Followed Robbies excellent guide to refurbishing the fbh, put it all back and primed the fuel via my iid, I couldn’t open the black plastic bleed screw on the expansion tank and didn’t want to break it so I couldn’t properly bleed the fbh coolant but ran the car with the heater turned off for a few miles then left to cool.
It was 2deg outside so when I restarted the car the fbh fired up and smoked like a chimney for a while and has done so on every start up I did notice smoke coming from where the exhaust is clamped to the fbh so I know this needs sealing, the problem is it will not start at all when using my Altox remote it keeps coming up with error 02
Any ideasRange Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
6th Jan 2018 9:13 pm
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2210
Hi,
don't know about the Altox stuff but there are a few "gaps" on the fbh exhaust so you may find that's as it should be
Transit! 2019
Gone D3 HSE 2008
Another Porsche Cayenne 2022
Gone Porsche Cayenne 2020
Gone RRS HSE Dynamic 2016
Gone RRS HSE LUX 2011
Gone RRS HSE 2006
Gone D3 SE 2.7 2008
gone D2 Td5 1999
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum