dieseltomten
Member Since: 03 Dec 2016
Location: Avesta
Posts: 61
  
|
| Problems with air compressor |
|
Im going nuts on my air compressor.
Its a Dunlop. I have changed the piston bearings and the seals around fhe compressor.
Not the little delivery valve yet.
Tested the compressor this night mounted on the disco3 but it wont run more than clop clop. As it breaks itself for blocked outlet. With the compressor inlet and outlet it will run smoothly but can be braked when i block the outlet.
Is the motor damaged?
Or can some more valves and  been blocked due to the wore rests from the worn piston seals?
I have raised the vehicle with compressed technical air earlier with a schrädervalve in the tank and it works well.
|
 2nd Feb 2018 12:41 am |
|
|
dieseltomten
Member Since: 03 Dec 2016
Location: Avesta
Posts: 61
|
Bumping the thread. Needs advice. We have blizzard here in Sweden so i need my disco😳. The compressor runs towards a backpressure and slows down and stops. Then the yellow light appears. Can it be a check valve that blocks or some errcodes that must be reseted?
|
| 2nd Feb 2018 11:40 am |
|
|
z1234567890
Member Since: 30 Nov 2015
Location: Dubai
Posts: 161
 
|
if you are sure that air compressor is damaged buy a new one
else you need to find out from visual leakage test using soapy water and or from error code from OBD II tools
|
| 2nd Feb 2018 8:03 pm |
|
|
dieseltomten
Member Since: 03 Dec 2016
Location: Avesta
Posts: 61
|
Solved it. The windings were black. Probably burned then
Who sell cheapest dunlop compressors?
Or is it possible to get spare rotors?
I overhauled the compressor just...
|
| 4th Feb 2018 10:50 pm |
|
|
