Member Since: 18 Jan 2015
Location: Fareham
Posts: 42
Iid tool - first timer, do's and dont's
Evening all,
Took delivery of my Bluetooth Iid tool today. Going to have a play tomorrow.
Any essential do's and dont's for a first timer? It's my only transport so don't want to be mucking anything up. I've got a 56 plate SE, so looking at the dash clock 4x4 screen etc.
Should I plug in to my Mac and check for updates first or plug straight in to car?
Thanks in advance
Leigh
13th Feb 2015 11:00 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72789
Update first.
13th Feb 2015 11:02 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Updates should be first thing to do after registering it. Depending what your going to be using it for a 12v supply could be advisable. First thing when plugging in is to read your faults, email to yourself then clear them. Doesn't take long to get the hang of it
13th Feb 2015 11:04 pm
Leigh-b
Member Since: 18 Jan 2015
Location: Fareham
Posts: 42
register online first, check for updates then connect to the car ?
13th Feb 2015 11:07 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
You need to plug it in yor car to get the code to register it then enter the code through the cc buttons, if I remember rightly, 'twas a long time ago when I did mine
13th Feb 2015 11:11 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72789
Register and update, then download the manual pdf file & check what to do for each update/reflash you want to do. It's all in there and very useful.
13th Feb 2015 11:11 pm
Leigh-b
Member Since: 18 Jan 2015
Location: Fareham
Posts: 42
Thanks guys
13th Feb 2015 11:15 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Member Since: 02 Feb 2015
Location: Norfolk
Posts: 76
The manual suggests either keeping the engine running or using a very expensive power supply. Nanocom suggests a very expensive battery charger. Prob a stupid question but if I am not planning on tinkering with the engine (and I assume that most folk do not) then do I just stick with "engine running"? Or did I miss something?
Thanks
14th Feb 2015 12:58 am
CDS Site Sponsor
Member Since: 12 Oct 2009
Location: All over the UK!
Posts: 3324
PatGAPInnov wrote:
User manual
I Know, I'm repeating myself...
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
14th Feb 2015 1:35 am
Norfolk
Member Since: 02 Feb 2015
Location: Norfolk
Posts: 76
From the manual.....
Ensure that the vehicle is in Park (or in Neutral with the handbrake applied for manual transaxle) and in a safe environment.
If the vehicle is outside, start the engine.
If in a garage, Turn the key to the ON position.
If you plan to use the device for more than 10 minutes with the engine not running, connect
a power supply (Midtronic’s PSC-550 or equivalent) to the vehicle’s battery.
Note: Battery chargers are not suitable due to poor line regulation.
Seemed a reasonable question....... Do most users actually need the power supply?
14th Feb 2015 1:56 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I follow the advice in the manual. It is born of experience.
So off normal battery for short periods or engine running for longer. If engine needs to be off then I add a regulated 10 amp power supply for stuff over 10 mins. If working for over 30 min I connect jump leads to another vehicle as I do not have (or need) a 25 amp+ regulated power supply.
Battery state of charge and cold weather will increase my caution.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 02 Feb 2015
Location: Norfolk
Posts: 76
Excellent. Thanks again.
14th Feb 2015 3:15 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8110
What you don't do is play with it for 15 minutes with the engine off(time goes very quickly when you are playing) and then do an upload, always make sure your battery is fully charged before uploading, if you have a good battery you will not have any problems, for important uploads the tool will check the battery state before starting and if not sufficiently charged will not continue, if you can do an upload in stages it is better to do so. Don't do what I did and connect a battery charger while uploading, a power supply yes or jump leads from a spare battery or vehicle.
Any problems contact GAP their customer service is out of this world It can when others can't,
It will when others won't,
It goes where others don't.
14th Feb 2015 10:01 am
vrmillsy
Member Since: 26 Dec 2014
Location: Essex
Posts: 68
I'm a first timer too! Have had a good look round and plan to flash some ecu's today.
Just wondered, I went to update it and the version it's on is a higher number than the suggested version, should I still update it?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
