Broma
Member Since: 11 Jul 2017
Location: Stoke on trent
Posts: 10
|
Hi all after replacing engine
have I managed somehow to
Cross the coolant pipe on my 2.7
From fuel burning heater
Does it connect to hoses to e g r
Valves or does it connect to
Hoses that feed heater matrix
Thankyou for any help really appreciated
|
21st Apr 2018 2:54 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10372
|
at the front of the engine above the cambelt cover is a temperature sensor and 2 pipe connections either side.
These go to each EGR
The 2 egrs connect with the metal pipe over the rear of the engine
Yes I think the FBH goes to the matrix, but not sure
|
21st Apr 2018 3:48 pm |
|
|
Broma
Member Since: 11 Jul 2017
Location: Stoke on trent
Posts: 10
|
Finally sorted it thought I had crossed
A pipe as heater and temp gauge both only
Getting warm
The culprit radiator blockage new rad arrives wensday👍
|
23rd Apr 2018 11:36 am |
|
|