Member Since: 04 Dec 2017
Location: South of Brum
Posts: 3
Install information for Bearmach light bar Discovery 3
Hi
Can any of you fine gurus help, I am looking to fit roof mounted lights and found the Bearmach light bar (part number BA2913). I can’t work out how to install the bar as the ad for it is poor, I spoke to Bearmach and they don’t have fitting instructions and were about as useful as tits on a fish!!!.
Have any of you got one fitted and how are they fitted, any help and advice greatly appreciated.
15th Dec 2017 3:28 pm
Hicky
Member Since: 04 Dec 2017
Location: South of Brum
Posts: 3
That’ll be a “no” then
20th Dec 2017 11:14 am
MJD 3
Member Since: 10 Feb 2016
Location: Teesside
Posts: 311
Saw the Bearmach light bar on the tinternet at the weekend and have tried to find photos of it mounted to a D3 other than the crappy pic of one attached to a Bearmach logo’d D3. Thought I’d put a request on here to see if anyone had done it, but looks like you beat me to the question Hicky.
I cannot believe there are no fitting instructions for this item and it looks now like i’ll check out other options for additional lighting. As much I like the prospeed bar and lazer lights set up I am not going to pay that kind of money.
The hunt continues!General Grabber AT3's
EGR Valves Blanked
Aluminium sump guard
Tree/Rock sliders.
Bank Account - Empty.
1st Aug 2018 7:38 pm
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
Was it fitted to a blue disco by any chance ? I’ve been down to Bearmach about twice a day the last few weeks... next time I’m down there I will have a look at it and take some photos. If I can track the owner down which shouldn’t be too hard i’ll See what’s what regarding fitting. There’s normally a blue one with Bearmach stickers on, a really nice D1 v8 done like the camel trophy cars, a really done up 110 and a 300 Tdi all parked on the grass outside the shop. Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
1st Aug 2018 10:01 pm
MJD 3
Member Since: 10 Feb 2016
Location: Teesside
Posts: 311
It was a silver d3 with the Bearmach logo on the bonnet, there was a black 110 in the background, the photo being taken at what looked like a reservoir.
Any info/pics would be appreciated General Grabber AT3's
EGR Valves Blanked
Aluminium sump guard
Tree/Rock sliders.
Bank Account - Empty.
2nd Aug 2018 8:51 am
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
I know which car that is. I’m sure that one had a roof tent on it ? I’ll see what I can do. Can’t promise anything but will try !Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum