Member Since: 04 Dec 2011
Location: Buskeud
Posts: 678
Part numbers for Rear diff + Rear Ac
Heya, I do woulder if anyone could provide what part number i would need to have the rear ac and the rear E-diff wiring. I see MMJ have some for sale, but im not sure if the connectors are present on those wiring's.
Two big retro-fits there! Has anyone bothered with rear HVAC before?
I believe the rear HVAC loom is JGK500050.
For the E-Diff, it looks like:
YNN500452 up to VIN '5A999999
YNN500650 for '6A000001 to '6A374420 (though this seems to superseed to the below)
YNN500651 for '6A374421 to '6A999999
Might be easier/cheaper to modify your existing one though.
Not an expert on these by any means, so I'd wait for someone to confirm, but hope this helps. Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
16th Jul 2015 10:00 am
Nodge68
Member Since: 05 Sep 2014
Location: Newquay
Posts: 1014
I quite fancy the E diff, but does it really make much difference to the D3's off road prowess? My old Freelander V6 had oodles of grip off road with open diffs and TC.Freelander SE 2005 Auto.
D3 TDV6. Gone.
16th Jul 2015 11:57 am
parrafin23
Member Since: 04 Dec 2011
Location: Buskeud
Posts: 678
Ye, I just need the Rear AC stuff, but if the connectors for the E-Diff is present its just a bonus for me.
I have owned the D3 for 5 years now, mutch has been done to it, and i would like to keep it atleasr 10yrs more. wel. as long as I can. I know all the mods and stuff, I will never get back when it comes to that day that I have to sell it. Cause I do love too much Addin wiring and ecu's and mods you guys are postin here.. Right now my headlamps are apart, waitin for the paint to dry..
Added cornerin lamps that was not there from when it left the factory. I do not have the insert thingy, but with the dremmel and bits that fits, it will be ok. A bit too much crome to my tase in the headlamp after removin the amper part of it. Btw.. do not use break cleaner in the cromed bits.. it just evaporates the crome.. even electrial tape removes the crome.. Duuuuud.. too much crome got removed... Damn.. I need to buy some crome spray or pain..
That was a bit :ot:
But do you guys see any wiring harness that MJM has for sale with this Rear ac connectors for sale?
I need the wiring thats on the floor.
The JGK500050 wiring is present on the Rear Ac matrix that I have here.
YNN500452 Amnyone got a picture of that wiring loom?
Mr.P
16th Jul 2015 3:10 pm
francescor75
Member Since: 07 Jul 2018
Location: Palermo
Posts: 83
Click image to enlarge
This is the part of ynn500452 of e-diff
17th Nov 2018 2:31 am
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Im sure there was a recent post where a guy said he had retro fitted rear a/c to his D3.
17th Nov 2018 6:31 am
francescor75
Member Since: 07 Jul 2018
Location: Palermo
Posts: 83
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
)
