Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO4.COM > Maintenance & Mods (D3)

New hubs now three amigos
Post Reply  Down to end
Page 1 of 1
sweetpea54321
 


Member Since: 23 Nov 2015
Location: Bolton
Posts: 212

England 2005 Discovery 3 TDV6 S Manual Zambezi SilverDiscovery 3
New hubs now three amigos

Well fitted two new front hubs today.

Job was relatively straight forward with only a few stubborn bolts.

Anyway.... all finished and wheels back on for test ride, and have special programs off Big Cry

Is it likely to be related to a fault with the abs sensors?

I do recall using heat on one bolt near to the offside sensor as that would come out of its housing so left it in situ.... no obvious damage that I can see.

Any Ideas?

thanks

SP Mods so far:

New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit  
Post #204707819th Apr 2019 6:06 pm
View user's profile Send private message View poster's gallery Reply with quote
Narpy
 


Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830

2005 Discovery 3 TDV6 S Manual Cairns BlueDiscovery 3

You need to recalibrate the steering angle sensor after tinkering and replacing steering or suspension components.
Fail to do it ( like you ) and you'll open up a world of all sorts of warnings and bells and whistles.
You might even require a full wheel alignment but do the calibration first. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.  
Post #204707919th Apr 2019 6:09 pm
View user's profile Send private message View poster's gallery Reply with quote
Flack
 


Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6240

England 2007 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

Does it fail straight away or after being driven for a short distance, abs sensor could be, was the reluctor ring clean and not damaged.?

Flack Thumbs Up  
Post #204708119th Apr 2019 6:15 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
sweetpea54321
 


Member Since: 23 Nov 2015
Location: Bolton
Posts: 212

England 2005 Discovery 3 TDV6 S Manual Zambezi SilverDiscovery 3

The warnings appear straight away upon starting.

The offside abs sensor appeared grubby when first removed but cleaned before refitting.

Please forgive my ignorance but what kit will I need to perform the recalibration is it the iidtool?
Thanks

Thumbs Up Mods so far:

New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit  
Post #204708619th Apr 2019 6:30 pm
View user's profile Send private message View poster's gallery Reply with quote
sweetpea54321
 


Member Since: 23 Nov 2015
Location: Bolton
Posts: 212

England 2005 Discovery 3 TDV6 S Manual Zambezi SilverDiscovery 3

Forgot to mention not sure how relevant but my motor is an early 2005 D3 S

Thumbs Up Mods so far:

New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit  
Post #204709119th Apr 2019 6:44 pm
View user's profile Send private message View poster's gallery Reply with quote
sweetpea54321
 


Member Since: 23 Nov 2015
Location: Bolton
Posts: 212

England 2005 Discovery 3 TDV6 S Manual Zambezi SilverDiscovery 3

Narpy wrote:
You need to recalibrate the steering angle sensor after tinkering and replacing steering or suspension components.
Fail to do it ( like you ) and you'll open up a world of all sorts of warnings and bells and whistles.
You might even require a full wheel alignment but do the calibration first.


Cheers Ian Thumbs Up Mods so far:

New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit  
Post #204709219th Apr 2019 6:45 pm
View user's profile Send private message View poster's gallery Reply with quote
sweetpea54321
 


Member Since: 23 Nov 2015
Location: Bolton
Posts: 212

England 2005 Discovery 3 TDV6 S Manual Zambezi SilverDiscovery 3

sweetpea54321 wrote:
The warnings appear straight away upon starting.

The offside abs sensor appeared grubby when first removed but cleaned before refitting.

Please forgive my ignorance but what kit will I need to perform the recalibration is it the iidtool?
Thanks

Thumbs Up


Cheers Flack Thumbs Up Mods so far:

New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit  
Post #204709319th Apr 2019 6:45 pm
View user's profile Send private message View poster's gallery Reply with quote
Flack
 


Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6240

England 2007 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

If it comes on right away then its not the steering angle sensor. more likely to be the abs system.

Flack Thumbs Up  
Post #204711619th Apr 2019 8:35 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
sweetpea54321
 


Member Since: 23 Nov 2015
Location: Bolton
Posts: 212

England 2005 Discovery 3 TDV6 S Manual Zambezi SilverDiscovery 3

Thanks flack... I’ve ordered a couple of new abs sensors so will give them a try first before progressing.

Cheers

Mike Thumbs Up Mods so far:

New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit  
Post #204711919th Apr 2019 9:38 pm
View user's profile Send private message View poster's gallery Reply with quote
Flack
 


Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6240

England 2007 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

Did you check the reluctor ring on the drive shaft to make sure its not damaged or clogged up with dirt and rust.?

Flack Thumbs Up  
Post #204716820th Apr 2019 10:17 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
sweetpea54321
 


Member Since: 23 Nov 2015
Location: Bolton
Posts: 212

England 2005 Discovery 3 TDV6 S Manual Zambezi SilverDiscovery 3

Morning Flack.... yes no damage just residual rust flakes from when I had hammered the old hub out.

These were cleared before reassemble.

I’ll have another look When the sensors arrive as il have to remove the carrier again to replace, at least the bolts will hopefully come out a bit easier this time! 🤞

Thanks

SP Thumbs Up Mods so far:

New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit  
Post #204718920th Apr 2019 11:36 am
View user's profile Send private message View poster's gallery Reply with quote
sweetpea54321
 


Member Since: 23 Nov 2015
Location: Bolton
Posts: 212

England 2005 Discovery 3 TDV6 S Manual Zambezi SilverDiscovery 3

Well quick update....

In between showers and downpours I have now managed to fit my new abs sensor which I’m pleased today has now also fixed the three amigos.

Old sensor was stubborn and broke off in the hub, so had to very carefully drill it out without damaging the reluctor ring. It took a while but finally removed cleaned and new sensor fitted.

Whilst car was out of use I also removed the compressor (see other thread) and replaced the dryer cap with a new aluminium cap. This has also now fixed the “normal ride height only” message and is now fully functional again with no warnings.

Finally adjusted my park brake as well which was beginning to get a little noisy.

All in all very happy and I have a quiet running D3 again.... well for now anyway!

Thanks to all who offered advice and support Thumbs Up

SP Thumbs Up Mods so far:

New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit  
Post #204906827th Apr 2019 3:12 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site