Hobson
Member Since: 20 Jun 2018
Location: Essex
Posts: 164
  
|
I've just enabled the door mirror(s) to dip when reverse gear is selected on a friend's 2008 HSE D3. Only the driver's side works - is this correct or should they both dip? On my D4 both sides dip.
|
 4th Sep 2019 7:59 am |
|
|
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2080
  
|
Both should dip , but the amount of dip can be set separately for each side and stored in the seat memory. Check that it hasn't been set to nil dip. Handbook shows the procedure
|
| 4th Sep 2019 8:58 am |
|
|
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
|
Have you put it in reverse, then set both mirrors to the desired position, then moved out of reverse and back to check they work? You need to set them both to your desired position, if the passenger side doesn’t move, this is the position the memory want to send it (or not in this case) as that’s the position it’s set to.
I’ve re-read that and it’s not very good England! Does it make sense?
|
| 4th Sep 2019 9:00 am |
|
|
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
|
L319 beat me to it.
|
| 4th Sep 2019 9:02 am |
|
|
Hobson
Member Since: 20 Jun 2018
Location: Essex
Posts: 164
|
Thank you all for the confirmation. I though it a bit odd that only one dipped. I'll have a play with it later on.
|
| 4th Sep 2019 9:36 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10365
|
be warned, after a while they seam to dip further and further! and is really annoying.
|
| 4th Sep 2019 12:06 pm |
|
|
