Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D3)

Whynns Turbo Foam Cleaner
Post Reply  Down to end
Page 1 of 1
cmb2020
 


Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150

United Kingdom 2005 Discovery 3 TDV6 SE Manual Aintree GreenDiscovery 3
Whynns Turbo Foam Cleaner

Hi all

I’ve got the spray can of foam turbo cleaner

For use directly to turbo inlet

Can someone please confirm the correct place to spray in to?

Is it just after the air filter box, or the rubber boost pipe, or the MAP sensor hole please?

Silly question I know but can’t understand which is the direct input to turbo
Tia
 Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales 
 
Post #23096714th Oct 2022 3:21 pm
View user's profile Send private message View poster's gallery Reply with quote
aja4x4
 


Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

The variable vanes that stick are in the exhaust side of the turbo so i dont think it will do anything
 Andrew

D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE 
 
Post #23097144th Oct 2022 7:56 pm
View user's profile Send private message View poster's gallery Reply with quote
cmb2020
 


Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150

United Kingdom 2005 Discovery 3 TDV6 SE Manual Aintree GreenDiscovery 3

If it were going to do anything.. where would be the best easily accessible entry point be please?
 Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales 
 
Post #23097154th Oct 2022 7:58 pm
View user's profile Send private message View poster's gallery Reply with quote
aja4x4
 


Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

There isnt an easy place
 Andrew

D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE 
 
Post #23097174th Oct 2022 8:00 pm
View user's profile Send private message View poster's gallery Reply with quote
cmb2020
 


Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150

United Kingdom 2005 Discovery 3 TDV6 SE Manual Aintree GreenDiscovery 3

Ok thanks
 Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales 
 
Post #23097194th Oct 2022 8:03 pm
View user's profile Send private message View poster's gallery Reply with quote
Flatlander
 


Member Since: 20 Jul 2015
Location: Here
Posts: 575

United Kingdom 

There isn't one - as advised above, it needs to be applied to the exhaust side - if it were to do anything.
  
Post #23097204th Oct 2022 8:03 pm
View user's profile Send private message View poster's gallery Reply with quote
cmb2020
 


Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150

United Kingdom 2005 Discovery 3 TDV6 SE Manual Aintree GreenDiscovery 3

Out of interest…

Which pipe is the inlet of the turbo please?

Is it the rubber one with the air flow going in to the MAP sensor box?
 Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales 
 
Post #23097374th Oct 2022 9:57 pm
View user's profile Send private message View poster's gallery Reply with quote
aja4x4
 


Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

Its the one that goes from the air filter accross the top of the rad the drops down the side of the engine.
If you remove the plastic pipe that runs accross the rad you could spray it in the pipe thats left on the passenger side of the rad.
A few people have put rags in there when working on there engines and forgot to remove them and the rags have been sucked down to the turbo.
 Andrew

D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE 
 
Post #23097424th Oct 2022 10:16 pm
View user's profile Send private message View poster's gallery Reply with quote
cmb2020
 


Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150

United Kingdom 2005 Discovery 3 TDV6 SE Manual Aintree GreenDiscovery 3

Ok thanks I know where you mean and I may as well give it a go seeing as I bought and half used it
 Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales 
 
Post #23097434th Oct 2022 10:18 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site